BS 2000-12:1993 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 2000-12:1993 Onwards

Standard Official Title of Standard
BS 2000-12:1993 Methods of test for petroleum and its products. Determination of specific energy
BS 2000-121:2002 Methods of test for petroleum and its products. Determination of oil separation from lubricating grease. Pressure filtration method
BS 2000-129:1993 Methods of test for petroleum and its products. Determination of bromine number. Colour indicator titration method
BS 2000-13:1994 Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Conradson method
BS 2000-130:1998 Methods of test for petroleum and its products. Petroleum products. Determination of bromine number of distillates and aliphatic olefins. Electrometric method
BS 2000-132:1996 Methods of test for petroleum and its products. Petroleum products. Lubricating grease. Determination of dropping point
BS 2000-133:1993 Methods of test for petroleum and its products. Determination of drop melting point of wax and petrolatum
BS 2000-135:1993 Methods of test for petroleum and its products. Determination of rust-preventing characteristics of steam-turbine oil in the presence of water
BS 2000-136.1:1998 Methods of test for petroleum and its products. Determination of saponification number. Colour-indicator titration method. Section 136.1: Colour-indicator titration method
BS 2000-136.2:1999 Methods of test for petroleum and its products. Determination of saponification number. Potentiometric titration method. Section 136.2: Potentiometric titration method
BS 2000-137:1993 Methods of test for petroleum and its products. Determination of oil content of water mix metalworking oil dilutions
BS 2000-138:2000 Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method
BS 2000-139:1998 Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of acid or base number. Colour-indicator titration method
BS 2000-14:1994 Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Ramsbottom method
BS 2000-142:1993 Methods of test for petroleum and its products. Determination of oxidation stability of lubricating grease. Oxygen bomb method
BS 2000-143:2001 Methods of test for petroleum and its products. Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products
BS 2000-146:2000 Methods of test for petroleum and its products. Determination of foaming characteristics of lubricating oils
BS 2000-149:1993 Methods of test for petroleum and its products. Petroleum products. Lubricating oils and additives. Determination of phosphorus content. Quinoline phosphomolybdate method
BS 2000-15:1995 Methods of test for petroleum and its products. Petroleum products. Determination of pour point
BS 2000-156:1997 Methods of test for petroleum and its products. Liquid petroleum products. Determination of hydrocarbon types. Fluorescent indicator adsorption method
BS 2000-163:1996 Methods of test for petroleum and its products. Petroleum products. Lubricating oils and additives. Determination of sulfated ash
BS 2000-168:1995 Methods of test for petroleum and its products. Determination of rolling bearing performance of lubricating grease
BS 2000-179:1993 Methods of test for petroleum and its products. Determination of cone penetration of petrolatum
BS 2000-182:1993 Methods of test for petroleum and its products. Determination of inorganic acidity of petroleum products. Colour indicator titration method
BS 2000-19:2002 Methods of test for petroleum and its products. Determination of demulsibility characteristics of lubricating oil
BS 2000-195:1998 Methods of test for petroleum and its products. Determination of distillation characteristics of volatile organic liquids
BS 2000-196:1997 Methods of test for petroleum and its products. Petroleum products. Determination of colour (ASTM scale)
BS 2000-2:1998 Methods of test for petroleum and its products. Petroleum products and hydrocarbon solvents. Determination of aniline point and mixed aniline point
BS 2000-213:1993 Methods of test for petroleum and its products. Determination of neutralization value of bitumen. Colour indicator titration method
BS 2000-220:1998 Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases
BS 2000-223:1993 Methods of test for petroleum and its products. Determination of ash of petroleum products containing mineral matter
BS 2000-27:1993 Methods of test for petroleum and its products. Determination of distillation characteristics of cutback bitumen
BS 2000-272:2000 Methods of test for petroleum and its products. Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method
BS 2000-274:1999 Methods of test for petroleum and its products. Petroleum products. Aviation and distillate fuels. Determination of electrical conductivity
BS 2000-276:1995 Methods of test for petroleum and its products. Petroleum products. Determination of base number. Perchloric acid potentiometric titration method
BS 2000-280:1999 Methods of test for petroleum and its products. Petroleum products and lubricants. Inhibited mineral turbine oils. Determination of oxidation stability
BS 2000-281:1993 Methods of test for petroleum and its products. Determination of anti-wear properties of hydraulic fluids. Vane pump method
BS 2000-284:1993 Methods of test for petroleum and its products. Determination of saponifiable and unsaponifiable matter in oils, fats and waxes
BS 2000-306:1994 Methods of test for petroleum and its products. Determination of oxidation stability of straight mineral oil
BS 2000-313:2001 Methods of test for petroleum and its products. Determination of air release of lubricating and hydraulic oils
BS 2000-315:1998 Methods of test for petroleum and its products. Petroleum products. Electrical insulating oils. Detection of corrosive sulfur
BS 2000-317:1995 Methods of test for petroleum and its products. Determination of residues in liquefied petroleum gases. Low temperature evaporation method
BS 2000-342:2000 Methods of test for petroleum and its products. Determination of thiol (mercaptan) sulfur in light and middle distillate fuels. Potentiometric method
BS 2000-346:1996 Methods of test for petroleum and its products. Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions.
BS 2000-35:1993 Methods of test for petroleum and its products. Determination of open flash and fire point. Pensky-Martens method
BS 2000-356:1999 Methods of test for petroleum and its products. Crude petroleum. Determination of water. Potentiometric Karl Fischer titration method
BS 2000-375:1999 Methods of test for petroleum and its products. Petroleum products. Total sediment in residual fuel oils. Determination by hot filtration
BS 2000-377:1995 Methods of test for petroleum and its products. Petroleum products. Determination of aluminium and silicon in fuel oils. Inductively coupled plasma emission and atomic absorption spectroscopy methods
BS 2000-381:1997 Methods of test for petroleum and its products. Aviation fuels. Estimation of net specific energy
BS 2000-386:1999 Methods of test for petroleum and its products. Crude petroleum. Determination of water. Coulometric Karl Fischer titration method
BS 2000-390:1994 Methods of test for petroleum and its products. Petroleum products. Total sediment in residual fuel oils. Determination using standard procedures for ageing
BS 2000-397:1995 Methods of test for petroleum and its products. Recovery of bitumen binders. Dichloromethane extraction rotary film evaporator method
BS 2000-412:1996 Methods of test for petroleum and its products. Petroleum products. Determination of water separability of petroleum oils and synthetic fluids
BS 2000-413:1996 Methods of test for petroleum and its products. Petroleum products. Low levels of vanadium in liquid fuels. Determination by flameless atomic absorption spectrometry after ashing
BS 2000-414:1996 Methods of test for petroleum and its products. Industrial quenching oils. Determination of cooling characteristics. Nickel-alloy probe test method
BS 2000-431:1998 Methods of test for petroleum and its products. Petroleum products. Determination of acid number. Semi-micro colour-indicator titration method
BS 2000-448.2:1999 Methods of test for petroleum and its products. Determination of the filterability of lubricating oils. Procedure for dry oils. Section 448.2: Procedure for dry oils
BS 2000-450:2000 Methods of test for petroleum and its products. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
BS 2000-454:2000 Methods of test for petroleum and its products. Determination of phosphorus in gasoline. Spectrophotometric method
BS 2000-455:2000 Methods of test for petroleum and its products. Determination of manganese in gasoline. Atomic absorption spectrometry (AAS) method
BS 2000-456:2000 Methods of test for petroleum and its products. Determination of potassium in gasoline. Atomic absorption spectrometry (AAS) method
BS 2000-48:1997 Methods of test for petroleum and its products. Determination of oxidation characteristics of lubricating oil
BS 2000-50:1993 Methods of test for petroleum and its products. Determination of cone penetration of lubricating grease
BS 2000-57:1995 Methods of test for petroleum and its products. Petroleum products. Determination of the smoke point of kerosine
BS 2000-61:1999 Methods of test for petroleum and its products. Determination of sulfur. High pressure combustion method
BS 2000-71.2:1995 Methods of test for petroleum and its products. Kinematic viscosity. Specifications and operating instructions for glass capillary kinematic viscometers
BS 2000-74:2000 Methods of test for petroleum and its products. Petroleum products and bituminous materials. Determination of water. Distillation method
BS 2000-76:1993 Methods of test for petroleum and its products. Determination of congealing point of waxes and petrolatum
BS 2003:1974 Specification for mild steel drums (light duty: removable heads)
BS 2006:1984 Specification for aluminium collapsible tubes
BS 2007:1975 Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements
BS 2011:Part 2.2Z/AFc and Z/BFc:1986 Environmental testing. Guidance. Tests Z/AFc and Z/BFc. Guidance on combined temperature (cold and dry heat) and vibration (sinusoidal) tests
BS 2011-2.1Fda:1973 Environmental testing. Tests. Test Fda. Random vibration - wide band reproducibility high
BS 2011-2.1J:1989 Environmental testing. Tests. Test J and guidance. Mould growth
BS 2011-2.1T:1981 Environmental testing. Tests. Test T. Soldering
BS 2011-2.1Ta:1989 Environmental testing. Tests. Test Ta. Soldering. Solderability testing by the wetting balance method
BS 2011-2.1Td:1990 Environmental testing. Tests. Test Td. Solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS 2011-2.2Kd:1984 Environmental testing. Guidance. Test Kd. Guidance on Test Kd: Hydrogen sulphide test for contacts and connections
BS 2011-5.1:1991 Environmental testing. Guide to drafting of test methods. General principles
BS 2015:1992 Glossary of paint and related terms





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.