BS 3762-3.21:1986 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 3762-3.21:1986 Onwards

Standard Official Title of Standard
BS 3762-3.21:1986 Analysis of formulated detergents. Quantitative test methods. Method for determination of total silica content
BS 3762-3.22:1986 Analysis of formulated detergents. Quantitative test methods. Method for determination of inorganic sulphate content
BS 3762-3.23:1990 Analysis of formulated detergents. Quantitative test methods. Method for determination of chelating agents content
BS 3762-3.24:1988 Analysis of formulated detergents. Quantitative test methods. Method for determination of low molecular mass alcohols content
BS 3762-3.25:1989 Analysis of formulated detergents. Quantitative test methods. Methods for determination of water and volatile matter content
BS 3762-3.5:1986 Analysis of formulated detergents. Quantitative test methods. Methods for determination of total organic matter content
BS 3762-3.6:1986 Analysis of formulated detergents. Quantitative test methods. Method for determination of matter soluble in light petroleum
BS 3762-3.7:1986 Analysis of formulated detergents. Quantitative test methods. Method for determination of total non-ionic matter content
BS 3762-3.8:1986 Analysis of formulated detergents. Quantitative test methods. Method for determination of alkanolamides content
BS 3762-3.9:1986 Analysis of formulated detergents. Quantitative test methods. Method for determination of soap content
BS 3762-4.1:1989 Analysis of formulated detergents. Physical test methods. Method for determination of clear point of liquid detergents
BS 3762-4.2:1986 Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
BS 3766:1979 Specification for coolant pumps for machine tools
BS 3769:1964 Specification for copper naphthenate and copper naphthenate concentrates
BS 3770:1964 Specification for zinc naphthenate and zinc naphthenate concentrates
BS 3775:1964 Specification for counting trays (planchets) for radioactive assay
BS 3777:1964 Specification for screw thread measuring cylinders
BS 3783:1964 Specification for X-ray lead-rubber protective aprons for personal use
BS 3788:1984 Specification for tin coated finish on culinary utensils
BS 3789:1975 Specification for non-returnable fibreboard tomato trays
BS 3790:1995 Specification for endless wedge belt drives and endless V-belt drives
BS 3797:1990 Specification for lightweight aggregates for masonry units and structural concrete
BS 3799:1974 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
BS 3800-3:1990 General tests for machine tools. Method of testing performance of machines operating under loaded conditions in respect of thermal distortion
BS 3810-1:1964 Glossary of terms used in materials handling. Terms used in connection with pallets, stillages, hand and powered trucks
BS 3810-2:1965 Glossary of terms used in materials handling. Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling)
BS 3810-3:1967 Glossary of terms used in materials handling. Terms used in connection with pneumatic and hydraulic handling
BS 3810-4:1968 Glossary of terms used in materials handling. Terms used in connection with cranes
BS 3810-5:1971 Glossary of terms used in materials handling. Terms used in connection with lifting tackle
BS 3810-6:1973 Glossary of terms used in materials handling. Terms used in connection with pulley blocks
BS 3810-7:1973 Glossary of terms used in materials handling. Terms used in connection with aerial ropeways and cableways
BS 3810-8:1975 Glossary of terms used in materials handling. Terms used in connection with lifts, lifting platforms and inclined haulages
BS 3810-9:1975 Glossary of terms used in materials handling. Terms used in connection with rail transport
BS 3811:1993 Glossary of terms used in terotechnology
BS 3813-1:1964 Specification for incinerators for waste from trade and residential premises. Capacities between 50 lb/h and 1000 lb/h
BS 3816:1989 Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies
BS 3818:1964 Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars
BS 381C:1996 Specification for colours for identification, coding and special purposes
BS 3821-1:1974 Specification for hardmetal dies and associated hardmetal tools. Designation and marking of as-sintered pellets and finished dies
BS 3821-2:1974 Specification for hardmetal dies and associated hardmetal tools. As-sintered pellets and finished dies for drawing round wire
BS 3821-3:1974 Specification for hardmetal dies and associated hardmetal tools. As-sintered pellets and finished dies for drawing round bar
BS 3821-4:1982 Specification for hardmetal dies and associated hardmetal tools. Dimensions and tolerances of as-sintered hardmetal pellets used in heading dies
BS 3823:1990 Grading of ash and hickory wood handles for hand tools
BS 3828:1973 Specification for crystal glass
BS 3830:1973 Specification for vitreous enamelled steel building components
BS 3831:1964 Specification for vitreous enamel finishes for domestic and catering appliances
BS 3837-1:2004 Expanded polystyrene boards. Boards and blocks manufactured from expandable beads. Requirements and test methods
BS 3838:1980 Specification for blazer fabrics
BS 3839:1978 Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices
BS 3841-1:1994 Determination of smoke emission from manufactured solid fuels for domestic use. General method for determination of smoke emission rate
BS 3841-2:1994 Determination of smoke emission from manufactured solid fuels for domestic use. Methods for measuring the smoke emission rate
BS 3843-1:1992 Guide to terotechnology (the economic management of assets). Introduction to terotechnology
BS 3843-2:1992 Guide to terotechnology (the economic management of assets). Introduction to the techniques and applications
BS 3843-3:1992 Guide to terotechnology (the economic management of assets). Guide to the available techniques
BS 3858:1992 Specification for binding and identification sleeves for use on electric cables and wires
BS 3863:1992 Guide for gas turbines procurement
BS 3866:1979 Specification for holes and shanks for buttons
BS 3867:1987 Method of specifying outside diameters and pressure ratings for pipe of thermoplastics materials (inch series)
BS 3868:1995 Specification for prefabricated drainage stack units in galvanized steel
BS 387:1979 Specification for interchangeability dimensions of the drive of solid and segmental circular saws for cold cutting of metals: saw diameter range 224 mm to 2240 mm
BS 3870-1:1991 Stitches and seams. Classification and terminology of stitch types
BS 3870-2:1991 Stitches and seams. Classification and terminology of seam types
BS 3876-1:1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for parallel barrel rollers, mountings and assemblies
BS 3876-2:1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for vertical spindle pulleys, mountings and assemblies
BS 3876-5:1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for suspended pulley assemblies and clamps
BS 3877:1991 Specification for metal cutting bandsaw blades
BS 3878:1982 Specification for flexible PVC sheeting for hospital use
BS 388:1972 Specification for aluminium pigments
BS 3880-1:1971 Specification for paper tape for data processing. Unpunched paper tape
BS 3880-2:1971 Specification for paper tape for data processing. Dimensions and location of punched holes in paper tape
BS 3880-3:1971 Specification for paper tape for data processing. Representation of codes on paper tape
BS 3880-4:1972 Specification for paper tape for data processing. General requirements for data interchange on punched paper tape
BS 3882:1994 Specification for topsoil
BS 3884-1:1974 Modular units for machine tools. Specification for basic units
BS 3884-2:1990 Modular units for machine tools. Specification for workholding pallets up to 800 mm nominal size
BS 3884-3:1990 Modular units for machine tools. Specification for workholding pallets over 800 mm nominal size
BS 3886:1965 Specification for dental impression compound
BS 3887:1991 Specification for pressure sensitive adhesive closing and sealing tapes
BS 3890:1965 General recommendations for the testing, calibration and processing of radiation monitoring films
BS 3892-1:1997 Pulverized-fuel ash. Specification for pulverized-fuel ash for use with Portland cement





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.