BS 3907-5:1966 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 3907-5:1966 Onwards

Standard Official Title of Standard
BS 3907-5:1966 Methods for the analysis of magnesium and magnesium alloys. Determination of manganese in magnesium and magnesium alloys (photometric-periodate method) (low contents)
BS 3907-6:1969 Methods for the analysis of magnesium and magnesium alloys. Determination of zirconium in magnesium and magnesium alloys (photometric method)
BS 3907-7:1969 Methods for the analysis of magnesium and magnesium alloys. Determination of nickel in magnesium alloys (photometric method)
BS 3907-8:1970 Methods for the analysis of magnesium and magnesium alloys. Determination of total rare earths in magnesium alloys (gravimetric method)
BS 3907-9:1969 Methods for the analysis of magnesium and magnesium alloys. Determination of zinc in magnesium alloys (ion-exchange-volumetric EDTA method)
BS 3908-10:1989 Methods for the sampling and analysis of lead and lead alloys. Antimony in lead alloys (titrimetric method)
BS 3908-13:1970 Methods for the sampling and analysis of lead and lead alloys. Antimony in lead and lead alloys (low contents) (photometric method)
BS 3908-2:1967 Methods for the sampling and analysis of lead and lead alloys. Arsenic in lead and lead alloys (photometric method)
BS 3908-6:1971 Methods for the sampling and analysis of lead and lead alloys. Tellurium in lead and lead alloys (photometric method)
BS 3908-9:1991 Methods for the sampling and analysis of lead and lead alloys. Sulphur in lead and lead alloys
BS 3909:1965 Specification for ingot lead for radiation shielding
BS 3914:1991 Specification for non-refillable metal aerosol dispensers of 50 ml to 1400 ml capacity and up to 85 mm diameter
BS 3919:1987 Specification for technical tallow and animal grease
BS 3921:1985 Specification for clay bricks
BS 3923-2:1972 Methods for ultrasonic examination of welds. Automatic examination of fusion welded butt joints in ferritic steels
BS 3924:1978 Specification for pressure-sensitive adhesive tapes for electrical insulating purposes
BS 3928:1969 Method for sodium flame test for air filters (other than for air supply to I.C. engines and compressors)
BS 3929:1965 Specification for domestic solid fuel ignition pokers and portable undergrate ignition burners for use with commercial butane
BS 3934-1:1992 Mechanical standardization of semiconductor devices. Recommendations for the preparation of drawings of semiconductor devices
BS 3934-10:1992 Mechanical standardization of semiconductor devices. Schedule of UK national drawings giving dimensions
BS 3934-5:1997 Mechanical standardization of semiconductor devices. Recommendations applying to tape automated bonding (TAB) of integrated circuits
BS 3935:1991 Guide to classification and marking of cattle hides and calfskins
BS 3936-1:1992 Nursery stock. Specification for trees and shrubs
BS 3936-10:1989 Nursery stock. Specification for ground cover plants
BS 3936-11:1984 Nursery stock. Specification for container-grown culinary herbs
BS 3936-2:1990 Nursery stock. Specification for roses
BS 3936-3:1990 Nursery stock. Specification for fruit plants
BS 3936-4:1984 Nursery stock. Specification for forest trees
BS 3936-5:1985 Nursery stock. Specification for poplars and willows
BS 3936-7:1989 Nursery stock. Specification for bedding plants
BS 3936-9:1998 Nursery stock. Specification for bulbs, corms and tubers
BS 3944-1:1992 Colour and diffusion filter material for theatre, television and similar entertainment purposes. Specification for flammability and dimensional stability
BS 3947:1976 Specification for liquid chlorine
BS 3951-1.2:1985 Freight containers. General. Specification for corner fittings for series 1 freight containers
BS 3951-1.4:1983 Freight containers. General. Glossary of terminology
BS 3951-2.1:1991 Freight containers. Specification and testing of series 1 freight containers. General cargo containers for general purposes
BS 3951-2.5:1992 Freight containers. Specification and testing of series 1 freight containers. Platform and platform-based containers
BS 3953:1990 Specification for synthetic resin bonded woven glass fabric laminated sheet
BS 3958-1:1982 Thermal insulating materials. Magnesia preformed insulation
BS 3958-2:1982 Thermal insulating materials. Calcium silicate preformed insulation
BS 3958-3:1985 Thermal insulating materials. Metal mesh faced man-made mineral fibre mattresses
BS 3958-4:1982 Thermal insulating materials. Bonded preformed man-made mineral fibre pipe sections
BS 3958-5:1986 Thermal insulating materials. Specification for bonded man-made mineral fibre slabs
BS 3958-6:1972 Thermal insulating materials. Finishing materials; hard setting composition, self-setting cement and gypsum plaster
BS 3962-1:1980 Methods of test for finishes for wooden furniture. Assessment of low angle glare by measurement of specular gloss at 85$0D
BS 3962-5:1980 Methods of test for finishes for wooden furniture. Assessment of surface resistance to cold oils and fats
BS 3962-6:1980 Methods of test for finishes for wooden furniture. Assessment of resistance to mechanical damage
BS 3963:1974 Method for testing the mixing performance of concrete mixers
BS 3969:1998 Recommendations for turf for general purposes
BS 3970-1:1990 Sterilizing and disinfecting equipment for medical products. Specification for general requirements
BS 3970-2:1991 Sterilizing and disinfecting equipment for medical products. Specification for steam sterilizers for aqueous fluids in sealed rigid containers
BS 3970-5:1990 Sterilizing and disinfecting equipment for medical products. Specification for low temperature steam disinfectors
BS 3970-6:1993 Sterilizing and disinfecting equipment for medical products. Specification for sterilizers using low-temperature steam with formaldehyde
BS 3981:1976 Specification. Iron oxide pigments for paints
BS 3984:1982 Specification for sodium silicates
BS 3985:2003 Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry
BS 3986-1:1998 Methods of test for drying performance of agricultural grain dryers. General procedures and limited requirements for wheat
BS 3986-2:1998 Methods of test for drying performance of agricultural grain dryers. Additional procedures and crop specific requirements
BS 3987:1991 Specification for anodic oxidation coatings on wrought aluminium for external architectural applications
BS 3988:1970 Specification for wrought aluminium for electrical purposes. Solid conductors for insulated cables
BS 3993:1966 Specification for hydrochloric acid, commercial types 1 and 2
BS 3996:1978 Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels)
BS 3998:1989 Recommendations for tree work
BS 3999-1:1993 Methods of measuring the performance of household electrical appliances. Electric kettles and jugs
BS 3999-16:1993 Methods of measuring the performance of household electrical appliances. Electric warming plates
BS 3999-17:1993 Methods of measuring the performance of household electrical appliances. Hand-held mains voltage operated spray guns
BS 3999-2:1991 Methods of measuring the performance of household electrical appliances. Thermal storage electric water-heaters
BS 3999-4:1967 Methods of measuring the performance of household electrical appliances. Electric clothes drying cabinets and racks
BS 3A 100:1991 Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
BS 3A 103:1962 Specification for steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
BS 3A 105:1962 Specification for corrosion-resisting steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
BS 3A 107:1962 Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft
BS 3A 108:1962 Specification for steel bolts (Unified hexagons and Unified threads) with close tolerance shanks for aircraft
BS 3A 109:1985 Specification for steel shear bolts (Unified hexagons and Unified threads)
BS 3A 116:1962 Specification for steel pan head bolts (Unified threads) for aircraft
BS 3A 117:1962 Specification for corrosion-resisting steel pan head bolts (Unified threads) for aircraft
BS 3A 171:1962 Specification for aluminium alloy pan head bolts (Unified threads) for aircraft
BS 3A 212:1993 Specification for cadmium-plated steel bolts, 55/65 tonf/in$u2 (Unified hexagons, 3A Unified threads and close tolerance shanks)
BS 3C 7:1989 Specification for aircraft tyre valves: interchangeability dimensions
BS 3F 114:1995 Specification for 80 g/m$u2 cotton madapolam fabric





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.