BS 3F 116:1995 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 3F 116:1995 Onwards

Standard Official Title of Standard
BS 3F 116:1995 Specification for mercerized cotton fabric
BS 3F 121:1995 Specification for metallic slide fasteners for aerospace purposes
BS 3F 122:1989 Specification for two ply cotton fabric interlayered with polychloroprene for liferaft packs
BS 3F 126:2002 35 g/m$u2 nylon parachute fabric
BS 3F 129:2003 Woven polyester narrow fabrics for aerospace purposes
BS 3F 135:2002 Braided nylon cord with unspecified dimensional stability for aerospace purposes
BS 3F 63:1981 Specification for low pressure oxygen hose for aeronautical purposes
BS 3F 65:1991 Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene)
BS 3F 69:1979 Specification for packaging and identification of vulcanized rubber items
BS 3F 70:1991 Specification for heavy duty braided rubber cord
BS 3F 71:1991 Specification for light duty braided rubber cord
BS 3G 100-2.2:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Magnetic influence
BS 3G 100-2.3.0:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Standard test requirements
BS 3G 100-2.3.1:1969 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Vibration
BS 3G 100-2.3.10:1974 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Impact icing
BS 3G 100-2.3.11:1973 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Water-proofness
BS 3G 100-2.3.12:1991 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Fluid contamination
BS 3G 100-2.3.13:1973 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Resistance to fire in designated fire zones
BS 3G 100-2.3.14:1973 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Acoustic vibration
BS 3G 100-2.3.15:1978 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Change of temperature
BS 3G 100-2.3.2:1970 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Temperature-pressure requirements
BS 3G 100-2.3.3:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Mould growth
BS 3G 100-2.3.4:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Differential pressure requirements
BS 3G 100-2.3.5:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Explosion-proofness
BS 3G 100-2.3.6:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Acceleration requirements
BS 3G 100-2.3.7:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Tropical exposure
BS 3G 100-2.3.8:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Salt mist
BS 3G 100-2.3.9:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Ice formation
BS 3G 100-3:1979 Specification for general requirements for equipment for use in aircraft. Characteristics of aircraft electrical power supplies
BS 3G 100-4.1.1:1982 Specification for general requirements for equipment for use in aircraft. Electrical equipment. Construction and general. Electrical insulation tests
BS 3G 100-4.1:1973 Specification for general requirements for equipment for use in aircraft. Electrical equipment. Construction and general
BS 3G 100-4.2:1980 Specification for general requirements for equipment for use in aircraft. Electrical equipment. Electromagnetic interference at radio and audio frequencies
BS 3G 101:1987 Specification for general requirements for mechanical and electromechanical aircraft indicators
BS 3G 148:1981 Specification for general purpose platinum temperature sensors for aircraft
BS 3G 197:1982 Specification for stud-type terminal blocks for terminations on aircraft electric cables
BS 3G 198-2:1997 Sleeves for aircraft electric cables and equipment wires. Specification for slip-on sleeves for identification purposes
BS 3G 198-4:1996 Sleeves for aircraft electric cables and equipment wires. Specification for fluoropolymer heat shrinkable sleeving for binding and insulation
BS 3G 210:1996 Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190$0DC) or nickel plated copper conductors (260$0DC)
BS 3G 230:2000 Specification for general requirements for aircraft electrical cables (second series)
BS 3G 231:1997 Specification for conductors for general-purpose aircraft electrical cables and aerospace applications
BS 3G 233:1990 Specification for electric cables for general airframe or equipment interconnect use (135$0DC), extruded insulation
BS 3HR 100:1978 Procedure for inspection and testing of wrought heat-resisting alloys
BS 3HR 601:1989 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 30 mm)
BS 3J 12:1991 Specification for pressure-sensitive adhesive identification tape
BS 3L 122:1970 Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)
BS 3L 124:1970 Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3)
BS 3L 125:1970 Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3)
BS 3L 51:1970 Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
BS 3L 58:1971 Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)
BS 3L 63:1971 Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 3L 78:1970 Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
BS 3L 80:1985 Specification for sheet and strip of aluminium-2$9D% magnesium alloy (temper designation-O)
BS 3L 81:1985 Specification for sheet and strip of aluminium-2$9D% magnesium alloy (temper designation H16 or H26)
BS 3L 86:1971 Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
BS 3M 45-2:1998 Aircraft tyres and rims. Test methods for tyres
BS 3M 60:1998 Separable tube fittings for fluid systems, 24$0D cone. General specification
BS 3N 3:2000 Breathing oxygen for airborne applications
BS 3S 102:1969 Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only)
BS 3S 105:1969 Specification for carbon steel (bar for the manufacture of forged bolts only)
BS 3S 132:1976 Specification. 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding)
BS 3S 144:1995 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
BS 3S 145:1996 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)
BS 3S 500:1996 Procedure for inspection, testing and acceptance of steel sheet and strip
BS 3S 61:1964 Specification for aircraft material. 12 per cent chromium corrosion-resisting steel (35/45 tonf/sq in: limiting ruling section 6 in)
BS 3S 62:1964 Specification for aircraft material. 12 per cent chromium corrosion-resisting steel (45/55 tonf/sq in: limiting ruling section 6 in)
BS 3S 91:1977 Specification for mild steel billets, bars, forgings and parts (suitable for bearing shells)
BS 3S 95:1967 Specification for 1$9H per cent nickel-chromium-molybdenum steel (90/110 kgf/mm$u2 (57/70 tonf/in$u2): limiting ruling section 150 mm (6 in))
BS 3SP 168-169:2002 Ferrules and assembly wires for braided rubber cord assemblies for aerospace use
BS 3SP 170-171:2002 Braided rubber cord assemblies for aerospace use
BS 3SP 3:1943 Specification for aircraft material. Fork joints (low tensile type) (for sizes No. 4 B.A. to $9H inch B.S.F. inclusive)
BS 3SP 89:1983 Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings
BS 3T 51:1945 Specification for aircraft material. High pressure seamless copper tubes
BS 3T 53:1980 Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)
BS 3T 60:1980 Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)
BS 3V 4:1929 Specification for aircraft material. Ash
BS 4001-1:1998 Care and maintenance of underwater breathing apparatus. Recommendations for the compressed air open circuit type
BS 4001-2:1967 Care and maintenance of underwater breathing apparatus. Standard diving equipment
BS 4006:1992 Specification for hand operated square drive socket wrenches and accessories
BS 4008:1991 Specification for cattle grids
BS 4009:1991 Specification for artificial mastoids for the calibration of bone vibrators used in hearing aids and audiometers





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.