BS 4140-23:1987 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 4140-23:1987 Onwards

Standard Official Title of Standard
BS 4140-23:1987 Methods of test for aluminium oxide. Determination of specific surface area by nitrogen adsorption (single-point method)
BS 4140-24:1987 Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
BS 4140-4:1986 Methods of test for aluminium oxide. Preparation of sample solution by alkaline fusion
BS 4140-5:1986 Methods of test for aluminium oxide. Determination of silica content
BS 4140-6:1980 Methods of test for aluminium oxide. Determination of titanium content
BS 4140-7:1986 Methods of test for aluminium oxide. Determination of iron content
BS 4140-8:1986 Methods of test for aluminium oxide. Determination of absolute density using a pyknometer
BS 4140-9:1986 Methods of test for aluminium oxide. Measurement of the angle of repose
BS 4142:1997 Method for rating industrial noise affecting mixed residential and industrial areas
BS 4145:1967 Specification for glass mica boards for electrical purposes
BS 4147:1980 Specification for bitumen-based hot-applied coating materials for protecting iron and steel, including suitable primers where required
BS 4148:1985 Specification for abbreviation of title words and titles of publications
BS 4151:1967 Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in$u2 (gauge)
BS 4154-1:1985 Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced). Specification for material and performance requirements
BS 4154-2:1985 Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced). Specification for profiles and dimensions
BS 416-1:1990 Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for spigot and socket systems
BS 4162:1983 Methods of test for buttons
BS 4163:2000 Health and safety for design and technology in schools and similar establishments. Code of practice
BS 4164:2002 Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer
BS 4167-10:1970 Specification for electrically-heated catering equipment. Sterilizing sinks
BS 4167-5:1969 Specification for electrically-heated catering equipment. Steaming ovens
BS 4168-1:1981 Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket head cap screws
BS 4168-6:1982 Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket button head screws
BS 4168-7:1982 Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket shoulder screws
BS 4168-8:1982 Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket countersunk head screws
BS 417-2:1987 Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders. Metric units
BS 4172-1:1999 Hand-held pressurized aerosol dispensers against houseflies. Specification for insecticidal performance
BS 4172-2:1999 Hand-held pressurized aerosol dispensers against houseflies. Method for determination of insecticidal performance
BS 4174:1972 Specification for self-tapping screws and metallic drive screws
BS 4177:1992 Specification for Cooker control units
BS 4181-1:1985 Identification of rubbers by infra-red spectrometry. Method for identification of hydrocarbon, chloroprene, nitrile and chlorosulphonated polyethylene rubbers
BS 4183:1967 Specification for machine screws and machine screw nuts. Metric series
BS 4184:1994 Glossary for power presses, open front mechanical type
BS 4185-1:1967 Machine tool components. Locknuts ('C' type, socket set screw locking)
BS 4185-10:1977 Machine tool components. Trapezoidal threads for lead and feed screw assemblies
BS 4185-11:1983 Machine tool components. Recommendations for accuracy grades of gears
BS 4185-13:1985 Machine tool components. Specification for dimensions of counterbored holes
BS 4185-14:1987 Machine tool components. Method for determination of the pilot diameter of 60$0D centre holes
BS 4185-2:1967 Machine tool components. Collars
BS 4185-7:1973 Machine tool components. Wide range collets
BS 4185-9:1976 Specification. Machine tool components. Levelling screws, nuts and seating plates
BS 4189:1967 Specification for conventional typographical character for legibility tests (ISO test character)
BS 419:1966 Specification for varnished fabrics and tapes for electrical purposes
BS 4190:2001 ISO metric black hexagon bolts, screws and nuts. Specification
BS 4193-10:1982 Hardmetal insert tooling. Specification for end mills with indexable inserts and Morse taper shank
BS 4193-11:1983 Hardmetal insert tooling. Specification for dimensions of face milling cutters with indexable inserts
BS 4193-12:1984 Hardmetal insert tooling. Specification for dimensions of side and face milling and slotting cutters with indexable inserts
BS 4193-13:1998 Hardmetal insert tooling. Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions
BS 4193-14:1997 Hardmetal insert tooling. Specification for designation of boring bars (tool holders with cylindrical shank) for indexable inserts
BS 4193-15:1986 Hardmetal insert tooling. Specification for dimensions for indexable hardmetal (carbide) inserts with wiper edges but without fixing hole
BS 4193-16:1986 Hardmetal insert tooling. Specification for designation of shank type milling cutters for indexable inserts
BS 4193-17:1989 Hardmetal insert tooling. Specification for designation of bore type milling cutters for indexable inserts
BS 4193-18:1997 Hardmetal insert tooling. Specification for dimensions of boring bars for indexable inserts
BS 4193-18:1999 Hardmetal insert tooling. Specification for dimensions of boring bars for indexable inserts
BS 4193-19:1993 Hardmetal insert tooling. Specification for dimensions of indexable ceramic inserts with rounded corners without fixing hole
BS 4193-2:1986 Hardmetal insert tooling. Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole
BS 4193-20:1993 Hardmetal insert tooling. Specification for dimensions of ceramic inserts with rounded corners with fixing hole
BS 4193-21:1993 Hardmetal insert tooling. Specification for cylindrical shanks with a parallel flat for drills with indexable inserts
BS 4193-22:1996 Hardmetal insert tooling. Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
BS 4193-3:1997 Hardmetal insert tooling. Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole
BS 4193-6:1997 Hardmetal insert tooling. Specification for the designation of turning and copying tool holders and cartridges for indexable (throwaway) inserts
BS 4193-7:1999 Hardmetal insert tooling. Single point tool holders for turning and copying for indexable inserts. Dimensions
BS 4193-8:1997 Hardmetal insert tooling. Specification for dimensions for type A cartridges for indexable (throwaway) inserts
BS 4193-9:1982 Hardmetal insert tooling. Specification for end mills with indexable inserts and flatted parallel shank
BS 4198:1967 Method for calculating loudness
BS 4203-1:1980 Extruded rigid PVC corrugated sheeting. Specification for performance requirements
BS 4203-2:1980 Extruded rigid PVC corrugated sheeting. Specification for profiles and dimensions
BS 4204:1989 Specification for flash welding of steel tubes for pressure applications
BS 4207:1989 Code of practice for the installation of monolithic linings for steel chimneys and flues
BS 4211:2005 Specification for permanently fixed ladders
BS 4213:2004 Cisterns for domestic use. Cold water storage and combined feed and expansion (thermoplastic) cisterns up to 500 l. Specification
BS 4215-15:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for insulated pins for use in electrode back-ups
BS 4215-2:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for straight resistance spot welding electrodes
BS 4215-6:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for electrode adaptors, female taper 1:10
BS 4215-7:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for male electrode caps
BS 4220-1:1974 Methods of test for seats on agricultural wheeled tractors. Tests on artificial track
BS 4222:1967 Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces
BS 4223:1989 Methods for determination of constructional details of textile floor coverings with yarn pile
BS 4230:1967 Specification for metal collapsible tubes for eye ointment
BS 4231:1992 Classification for viscosity grades of industrial liquid lubricants





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.