BS 4427-15:1982 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 4427-15:1982 Onwards

Standard Official Title of Standard
BS 4427-15:1982 Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use.
BS 4427-2:1969 Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. Measurement of pH value of sodium tripolyphosphate
BS 4427-3:1989 Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use.
BS 4427-4:1969 Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. Determination of loss on ignition
BS 4427-5:1974 Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. Determination of particle size distribution
BS 4427-6:1974 Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. Estimation of pyrophosphate content of sodium pyrophosphate
BS 4428:1989 Code of practice for general landscape operations (excluding hard surfaces)
BS 4429:1987 Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications
BS 4430-2:1969 Recommendations for the safety of powered industrial trucks. Operation and maintenance
BS 4431:1989 Methods of sampling and test for liquefied anhydrous ammonia
BS 4432-1:1995 Methods for determining optical properties of pulp, paper and board. Measurement of diffuse reflectance factor of paper, board and pulps
BS 4433-1:1994 Domestic solid mineral fuel fired boilers with rated output up to 45 kW. Domestic solid mineral fuel fired boilers with rated output up to 45 kw. Specification for boilers with undergrate ash removal
BS 4433-2:1994 Domestic solid mineral fuel fired boilers with rated output up to 45 kW. Specification for gravity feed boilers designed to burn small anthracite
BS 4436:1978 Specification for reach and straddle fork lift trucks - stability tests
BS 4438:1969 Specification for filing cabinets and suspended filing pockets
BS 4439:1969 Specification for screwed studs for general purposes. Metric series
BS 4442-1:1969 Specification for lathe spindle noses and faceplates. Types 'A' and 'Camlock'
BS 4443-1:1988 Methods of test for flexible cellular materials. Method 4. Measurement of cell count
BS 4443-3:1988 Methods of test for flexible cellular materials. Method 8. Determination of creep. Method 9. Determination of dynamic cushioning performance
BS 4443-4:1989 Methods of test for flexible cellular materials. Method 10. Determination of solvent swelling
BS 4443-7:1992 Methods of test for flexible cellular materials. Method 17. Determination of tear strength of flexible cellular material with an integral skin. Method 18. Determination of compression set under humid conditions
BS 4444:1989 Guide to electrical earth monitoring and protective conductor proving
BS 4445:1969 Schedule of tests for gasification and reforming plants using hydrocarbon feedstocks
BS 4448:1988 Specification for school exercise books and papers
BS 4449:1997 Specification for carbon steel bars for the reinforcement of concrete
BS 4462:1969 Guide for the preparation of technical sales literature for measuring instruments and process control equipment
BS 4463:1969 Specification for crinkle washers for general engineering purposes. Metric series
BS 4464:1969 Specification for spring washers for general engineering and automobile purposes. Metric series
BS 4465:1989 Specification for design and construction of electric hoists for both passengers and materials
BS 4467:1991 Guide to dimensions in designing for elderly people
BS 4475:2000 Specification for straight mineral lubricating oils
BS 4478:1969 Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers
BS 4479-1:1990 Design of articles that are to be coated. General recommendations
BS 4479-2:1990 Design of articles that are to be coated. Recommendations for electroplated and autocatalytic coatings
BS 4479-3:1990 Design of articles that are to be coated. Recommendations for conversion coatings
BS 4479-4:1990 Design of articles that are to be coated. Recommendations for paint coatings and varnish coatings
BS 4479-5:1990 Design of articles that are to be coated. Recommendations for anodic oxidation coatings
BS 4479-7:1990 Design of articles that are to be coated. Recommendations for thermally sprayed coatings
BS 4479-8:1990 Design of articles that are to be coated. Recommendations for vitreous enamel coatings
BS 4479-9:1990 Design of articles that are to be coated. Recommendations for low pressure and vacuum deposited coatings
BS 4480-1:1992 Plain bearings: metric series. Sintered bushes. Dimensions and tolerances
BS 4480-2:1974 Specification for plain bearings: metric series. Solid plastics bushes
BS 4480-3:1993 Plain bearings: metric series. Copper alloy bushes
BS 4480-4:1979 Specification for plain bearings: metric series. Dimensions, tolerances and methods of checking wrapped bushes
BS 4480-5:1979 Plain bearings: metric series. Dimensions, tolerances and methods of checking thin-walled half bearings
BS 4480-6:1984 Plain bearings: metric series. Specification for dimensions and tolerances of ring type thrust washers made from strip
BS 4480-7:1984 Plain bearings: metric series. Specification for dimensions and tolerances of pressed bimetallic half thrust washers
BS 4480-8:1984 Plain bearings: metric series. Specification for dimensions, tolerances and methods of checking of thin-walled flanged half bearings
BS 4480-9:1995 Plain bearings: metric series. Checking the outside diameter of wrapped bushes
BS 448-1:1981 Dimensions of electronic tubes and valves. IEC dimensions
BS 4481-2:1983 Bonded abrasive products. Specification for dimensions of grinding wheels and segments
BS 448-2:1981 Dimensions of electronic tubes and valves. Specification for dimensions of United Kingdom electronic tubes
BS 4482:1985 Specification for cold reduced steel wire for the reinforcement of concrete
BS 4483:1998 Steel fabric for the reinforcement of concrete
BS 4484-1:1969 Specification for measuring instruments for constructional works. Metric graduation and figuring of instruments for linear measurement
BS 4485-1:1969 Water cooling towers. Glossary of terms
BS 4485-2:1988 Water cooling towers. Methods for performance testing
BS 4485-3:1988 Water cooling towers. Code of practice for thermal and functional design
BS 4485-4:1996 Water cooling towers. Code of practice for structural design and construction
BS 4486:1980 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
BS 449-2:1969 Specification for the use of structural steel in building. Metric units
BS 4493:1969 Specification for copper salts for electroplating
BS 4495:1969 Recommendations for the flame spraying of ceramic and cermet coatings
BS 4496:1984 Method for determination of acid-insoluble ash of pulp
BS 4497:1969 Recommendations for the detection and estimation of nitrogenous treating agents in paper
BS 4498:1982 Method for determination of the Kappa number of pulp (degree of delignification)
BS 4499:1984 Method for determination of alkali solubility of pulp
BS 450:1958 Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)
BS 4500-4:1985 ISO limits and fits. Specification for system of cone (taper) fits for cones from $iC=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
BS 4500-5:1988 ISO limits and fits. Specification for system of cone tolerances for conical workpieces from $7IC$7R = 1:3 to 1:500 and lengths from 6 mm to 630 mm
BS 4500A:1970 ISO limits and fits. Data sheet: selected ISO fits - hole basis
BS 4500B:1970 ISO limits and fits. Data sheet: selected ISO fits - shaft basis
BS 4505-1:1981 Digital data transmission. Specification for basic mode control procedures
BS 4505-2:1990 Digital data transmission. Character structure for start/stop and synchronous transmission
BS 4505-3:1981 Digital data transmission. Method for use of longitudinal parity to detect errors in information messages
BS 4505-6:1976 Digital data transmission. Complements to the basic mode control procedures; recovery, abort and interrupt, multiple station selection
BS 4505-7:1976 Digital data transmission. Basic mode control procedures; conversational information message transer
BS 4506:1970 Specification for shaft ends
BS 4507:1969 Specification for grease gun cartridges (composite type)
BS 4508-1:1986 Thermally insulated underground pipelines. Specification for steel cased systems with air gap





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.