BS 1006:B01C:LFS4:1990 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 1006:B01C:LFS4:1990 Onwards

Standard Official Title of Standard
BS 1006:B01C:LFS4:1990 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 4
BS 1006:B01C:LFS5:1988 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 5
BS 1006:B01C:LFS6:1988 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 6
BS 1006:B01C:LFS7:1985 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 7
BS 1006:B01C:LFS8:1987 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 8
BS 1010-2:1973 Specification for draw-off taps and stopvalves for water services (screw-down pattern). Draw-off taps and above-ground stopvalves
BS 1016-1:1973 Methods for analysis and testing of coal and coke. Total moisture of coal
BS 1016-10:1977 Methods for analysis and testing of coal and coke. Arsenic in coal and coke
BS 1016-100:1994 Methods for analysis and testing of coal and coke. General introduction and methods for reporting results
BS 1016-102:2000 Methods for analysis and testing of coal and coke. Determination of total moisture of coke
BS 1016-104.1:1999 Methods for analysis and testing of coal and coke. Proximate analysis. Determination of moisture content of the general analysis test sample. Determination of ash
BS 1016-104.3:1998 Methods for analysis and testing of coal and coke. Determination of volatile matter content
BS 1016-104.4:1998 Methods for analysis and testing of coal and coke. Determination of ash content
BS 1016-105:1992 Methods for analysis and testing of coal and coke. Determination of gross calorific value
BS 1016-106.1.1:1996 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of carbon and hydrogen content. High temperature combustion method
BS 1016-106.1.2:1996 Methods for analysis and testing of coal and coke. Liebig method
BS 1016-106.2:1997 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of nitrogen content
BS 1016-106.4.1:1993 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. Eschka method
BS 1016-106.4.2:1996 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. High temperature combustion method
BS 1016-106.5:1996 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of forms of sulfur in coal
BS 1016-106.6.1:1997 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of chlorine content. Eschka method
BS 1016-106.7:1997 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of carbonate carbon content
BS 1016-107.1:1991 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of crucible swelling number
BS 1016-107.2:1991 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Assessment of caking power by Gray-King coke test
BS 1016-107.3:1990 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of swelling properties using a dilatometer
BS 1016-108.1:1996 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of shatter indices
BS 1016-108.2:1992 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of Micum and Irsid indices
BS 1016-108.3:1995 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (small container)
BS 1016-108.4:1995 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (large container)
BS 1016-108.5:1992 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of density and porosity
BS 1016-108.6:1992 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of critical air blast value
BS 1016-109:1995 Methods for analysis and testing of coal and coke. Size analysis of coal
BS 1016-110.1:1996 Methods for analysis and testing of coal and coke. Size analysis of coke. Nominal top size greater than 20 mm
BS 1016-110.2:1996 Methods for analysis and testing of coal and coke. Size analysis of coke. Nominal top size 20 mm or less
BS 1016-111:1998 Methods for analysis and testing of coal and coke. Determination of abrasion index of coal
BS 1016-112:1995 Methods for analysis and testing of coal and coke. Determination of Hardgrove grindability index of hard coal
BS 1016-113:1995 Methods for analysis and testing of coal and coke. Determination of ash fusibility
BS 1016-14:1963 Methods for analysis and testing of coal and coke. Analysis of coal ash and coke ash
BS 1016-21:1981 Methods for analysis and testing of coal and coke. Determination of moisture-holding capacity of hard coal
BS 1016-6:1977 Methods for analysis and testing of coal and coke. Ultimate analysis of coal
BS 1016-7:1977 Methods for analysis and testing of coal and coke. Ultimate analysis of coke
BS 1016-8:1977 Methods for analysis and testing of coal and coke. Chlorine in coal and coke
BS 1016-9:1977 Methods for analysis and testing of coal and coke. Phosphorus in coal and coke
BS 1017-1:1989 Sampling of coal and coke. Methods for sampling of coal
BS 1017-2:1994 Sampling of coal and coke. Methods for sampling of coke
BS 10175:2001 Investigation of potentially contaminated sites. Code of practice
BS 1041-2.1:1985 Code for temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers
BS 1041-2.2:1989 Code for temperature measurement. Expansion thermometers. Guide to selection and use of dial-type expansion thermometers
BS 1041-3:1989 Temperature measurement. Guide to selection and use of industrial resistance thermometers
BS 1041-4:1992 Temperature measurement. Guide to the selection and use of thermocouples
BS 1041-5:1989 Temperature measurement. Guide to selection and use of radiation pyrometers
BS 1041-7:1988 Temperature measurement. Guide to selection and use of temperature/time indicators
BS 1042-1.4:1992 Measurement of fluid flow in closed conduits. Pressure differential devices. Guide to the use of devices specified in Sections 1.1 and 1.2
BS 1042-2.1:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method using Pitot static tubes
BS 1042-2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS 1042-2.3:1984 Measurement of fluid flow in closed conduits. Velocity area methods.
BS 1042-2.4:1989 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions
BS 1044-1:1964 Specificaton for gauge blanks. Plug, ring and calliper gauges
BS 1050:1984 Specification for indicator lamps for use in telecommunication apparatus and for allied purposes
BS 1052:1980 Specification for mild steel wire for general engineering purposes
BS 1054:1975 Specification for engineers' comparators for external measurement
BS 1070:1993 Specification for black paint (tar-based)
BS 1075:1989 Specification for tungsten halogen lamps (non vehicle)
BS 1083:1965 Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
BS 1088-1:2003 Marine plywood. Requirements
BS 1088-2:2003 Marine plywood. Determination of bonding quality using the knife test
BS 1089:1973 Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types
BS 1090:1970 Specification for flameproof hand-held electric drilling machines primarily for use in mines
BS 1091:1963 Specification for pressed steel gutters, rainwater pipes, fittings and accessories
BS 1098-1:1967 Specification for jig bushes. Inch units
BS 1098-2:1977 Specification for jig bushes. Metric units
BS 11:1985 Specification for railway rails
BS 1101:1977 Specification for pressure containers for paint and other similar substances
BS 1103:1989 Specification for fabrics for the reinforcement of rubber hoses
BS 1104:1957 Specification for general purpose Acme screw threads
BS 1109:1943 Specification for cold forged mild steel rivets for cold closing
BS 1113:1999 Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
BS 1117-2:1964 Specification for bare fine resistance wire for precision electrical equipment. Metric units
BS 1123-1:1987 Safety valves, gauges and fusible plugs for compressed air or inert gas installations. Code of practice for installation
BS 1125:1987 Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.