BS 5335-2:1991 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 5335-2:1991 Onwards

Standard Official Title of Standard
BS 5335-2:1991 Continental quilts. Specification for quilts filled with feather and/or down
BS 5336:1976 Specification. Cores made of ferromagnetic oxides for use in high flux density transformers
BS 5338:1976 Code of practice for zinc alloy pressure die casting for engineering
BS 5339:1976 Method of measurement of colour in Hazen units (platinum-cobalt scale) of liquid chemical products
BS 534:1990 Specification for steel pipes, joints and specials for water and sewage
BS 5341-5:1976 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Ring grooves
BS 5341-6.1:1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. Vocabulary
BS 5341-6.5:1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabularly, inspection methods and generic specifications. Quality requirements
BS 5341-7.3.1:1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Keystone and half keystone compression rings.
BS 5341-7.4:1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Specification for oil control rings
BS 5341-8.1:1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for multi-piece oil control rings. Specification for coil-spring-loaded oil control rings
BS 5342:1985 Specification for rubber hoses for high-pressure saturated steam
BS 5343-2:1991 Gas detector tubes. Specification for long term gas detector tubes
BS 5344:1985 Methods for performance tests for rotary and percussive pneumatic tools
BS 5346:1976 Specification. ISO metric trapezoidal screw threads
BS 5347:1976 Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment
BS 5348-2:1989 Methods for sampling meat and meat products. Preparation of test samples for microbiological examination
BS 5350-0:1987 Methods of test for adhesives. General introduction
BS 5350-A1:1976 Methods of test for adhesives. Adherends. Adherend preparation
BS 5350-A2:1990 Methods of test for adhesives. Adherends. Guide to the selection of adherend materials
BS 5350-B1:1978 Methods of test for adhesives. Determination of density
BS 5350-B2:1976 Methods of test for adhesives. Adhesives. Determination of solids content
BS 5350-B5:1976 Methods of test for adhesives. Determination of gelation time
BS 5350-B8:1990 Methods of test for adhesives. Adhesives. Determination of viscosity
BS 5350-B9:1984 Methods of test for adhesives. Adhesives. Determination of resistance to sagging (flow after application)
BS 5350-C1:1986 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of cleavage strength of adhesive bonds
BS 5350-C13:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Climbing drum peel test
BS 5350-C14:1979 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. 90$0D peel test for a rigid-to-rigid assembly
BS 5350-C15:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in compressive shear
BS 5350-C5:2002 Methods of test for adhesives. Determination of bond strength in longitudinal shear for rigid adherends
BS 5350-C6:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in direct tension in sandwich panels
BS 5350-C7:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of creep and resistance to sustained application of force
BS 5350-D4:1976 Methods of test for adhesives. Adhesively bonded joints: environmental tests. Determination of staining potential
BS 5350-E1:1976 Methods of test for adhesives. Sampling and analysis of test data. Guide to statistical analysis
BS 5350-E2:1979 Methods of test for adhesives. Sampling and analysis of test data. Guide to sampling
BS 5350-G2:1987 Methods of test for adhesives. Tests on anaerobic adhesives. Determination of static shear strength of anaerobic adhesives
BS 5350-G3:1987 Methods of test for adhesives. Determination of ability of anaerobic adhesives to set on metal surfaces
BS 5350-H1:1981 Methods of test for adhesives. Determination of heat stability of hot melt adhesives in the application equipment
BS 5350-H2:1982 Methods of test for adhesives. Physical tests on hot-melt adhesives. Determination of low temperature flexibility or cold crack temperature
BS 5350-H3:1984 Methods of test for adhesives. Physical tests on hot-melt adhesives. Determination of heat resistance of hot-melt adhesives
BS 5350-H4:1984 Methods of test for adhesives. Physical tests on hot-melt adhesives. Determination of maximum open time of hot-melt adhesives (oven method)
BS 5353:1989 Specification for steel plug valves
BS 5355:1976 Specification for filling ratios and developed pressures for liquefiable and permanent gases
BS 5357:1995 Code of practice for installation of security glazing
BS 5369:1987 Methods of testing doors; behaviour under humidity variations of door leaves placed in successive uniform climates
BS 5372:1997 Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors
BS 5377-1:1988 Assessment of laundering effects by means of a cotton control cloth. Specification for preparation and use of the cotton control cloth
BS 5377-2:1990 Assessment of laundering effects by means of a cotton control cloth. Methods of analysis and test for the unsoiled cotton control cloth
BS 5378-2:1980 Safety signs and colours. Specification for colorimetric and photometric properties of materials
BS 5380:1984 Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads
BS 5381-2:1998 Methods for determination of physical properties of tobacco and tobacco products. Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus
BS 5381-4:1998 Methods for determination of physical properties of tobacco and tobacco products. Determination of air permeability of materials used as cigarette papers, filter plug wrap and filter joining paper
BS 5381-5:2002 Methods for determination of physical properties of tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods
BS 5381-7:1997 Methods for determination of physical properties of tobacco and tobacco products. Loss of tobacco from cigarette ends using a rotating cylindrical cage
BS 5381-8:1997 Methods for determination of physical properties of tobacco and tobacco products. Loss of tobacco from cigarette ends using a rotating cubic box (sismelatophore)
BS 5383:1986 Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes
BS 5385-1:1995 Wall and floor tiling. Code of practice for the design and installation of internal ceramic and natural stone wall tiling and mosaics in normal conditions
BS 5385-2:1991 Wall and floor tiling. Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience tiles)
BS 5385-3:1989 Wall and floor tiling. Code of practice for the design and installation of ceramic floor tiles and mosaics
BS 5385-4:1992 Wall and floor tiling. Code of practice for tiling and mosaics in specific conditions
BS 5385-5:1994 Wall and floor tiling. Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings
BS 5386-3:1980 Specification for gas burning appliances. Domestic cooking appliances burning gas
BS 5386-4:1991 Specification for gas burning appliances. Built-in domestic cooking appliances
BS 5388:1976 Specification for spray taps
BS 5391-1:1976 Specification for acrylonitrile-butadiene-styrene (ABS) pressure pipe. Pipe for industrial uses
BS 5392-1:1976 Specification for acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe. Fittings for use with pipe for industrial uses
BS 5395-1:2000 Stairs, ladders and walkways. Code of practice for the design, construction and maintenance of straight stairs and winders
BS 5395-2:1984 Stairs, ladders and walkways. Code of practice for the design of helical and spiral stairs
BS 5395-3:1985 Stairs, ladders and walkways. Code of practice for the design of industrial type stairs, permanent ladders and walkways
BS 5396:1976 Specification for seamless steel CO$d2 containers for fixed fire-fighting installations on ships
BS 5397-6:1990 High-level data link control (HDLC) procedures. Specification for multilink procedures
BS 5398:1976 Classification of methods for mounting and joining of fishing nets
BS 5400-1:1988 Steel, concrete and composite bridges. General statement
BS 5400-10:1980 Steel, concrete and composite bridges. Code of practice for fatigue
BS 5400-10C:1999 Steel, concrete and composite bridges. Charts for classification of details for fatigue
BS 5400-2:1978 Steel, concrete and composite bridges. Specification for loads
BS 5400-3:2000 Steel, concrete and composite bridges. Code of practice for design of steel bridges
BS 5400-4:1990 Steel, concrete and composite bridges. Code of practice for design of concrete bridges
BS 5400-5:1979 Steel, concrete and composite bridges. Code of practice for design of composite bridges
BS 5400-6:1999 Steel, concrete and composite bridges. Specification for materials and workmanship, steel





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.