BS 5651:1989 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 5651:1989 Onwards

Standard Official Title of Standard
BS 5651:1989 Method for cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies
BS 5652:1979 Specification for the calibration of hydrophones
BS 5653:1978 Specification for hydrophones for calibration purposes
BS 5654-1:1979 Stabilized power supplies, d.c. output. Terms and definitions
BS 5654-2:1979 Stabilized power supplies, d.c. output. Method of specifying rating and performance
BS 5654-4:1979 Stabilized power supplies, d.c. output. Tests other than radio-frequency interference
BS 5655-1:1979 Lifts and service lifts. Safety rules for the construction and installation of electric lifts
BS 5655-1:1986 Lifts and service lifts. Safety rules for the construction and installation of electric lifts
BS 5655-10.1.1:1995 Lifts and service lifts. Specification for the testing and examination of lifts and service lifts. Electric lifts. Commissioning tests for new lifts
BS 5655-10.2.1:1995 Lifts and service lifts. Specification for the testing and examination of lifts and service lifts. Hydraulic lifts. Commissioning tests for new lifts
BS 5655-10:1986 Lifts and service lifts. Specification for the testing and inspection of electric and hydraulic lifts
BS 5655-11:1989 Lifts and service lifts. Recommendations for the installation of new, and the modernization of, electric lifts in existing buildings
BS 5655-12:1989 Lifts and service lifts. Recommendations for the installations of new, and the modernization of, hydraulic lifts in existing buildings
BS 5655-13:1995 Lifts and service lifts. Recommendations for vandal resistant lifts
BS 5655-14:1995 Lifts and service lifts. Specification for hand-powered service lifts and platform hoists
BS 5655-2:1988 Lifts and service lifts. Safety rules for the construction and installation of hydraulic lifts
BS 5655-6:2002 Lifts and service lifts. Code of practice for the selection and installation of new lifts
BS 5655-7:1983 Lifts and service lifts. Specification for manual control devices, indicators and additional fittings
BS 5655-8:1983 Lifts and service lifts. Specification for eyebolts for lift suspension
BS 5655-9:1985 Lifts and service lifts. Specification for guide rails
BS 5656-1:1997 Safety rules for the construction and installation of escalators and passenger conveyors. Specification and proformas for test and examination of new installations
BS 5656-2:2004 Escalator and moving walks. Safety rules for the construction and installation of escalators and moving walks. Code of practice for the selection, installation and location of new escalators and moving walks
BS 5658:1979 Specification for gold potassium cyanide for electroplating
BS 5660-1:1987 Methods of sampling iron ores. Manual method of increment sampling
BS 5660-2:2001 Methods of sampling iron ores. Sampling and sample preparation procedures
BS 5661:1987 Method for preparation of samples of iron ores by manual means
BS 5662-1:1987 Evaluation of sampling methods for iron ores. Experimental methods for evaluation of quality variation
BS 5662-2:1987 Evaluation of sampling methods for iron ores. Experimental methods for checking the precision of sampling
BS 5662-3:1987 Evaluation of sampling methods for iron ores. Experimental methods for checking the bias of sampling
BS 5663-2:1987 Methods of testing iron ores. Determination of size distribution by sieving
BS 5664-2.2:1988 Solventless polymerisable resinous compounds used for electrical insulation. Methods of test. Coating powders
BS 5664-3.11:1995 Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials. Epoxy resin-based coating powders
BS 5666-2:1980 Methods of analysis of wood preservatives and treated timber. Qualitative analysis
BS 5666-3:1991 Methods of analysis of wood preservatives and treated timber. Quantitative analysis of preservatives and treated timber containing copper/chromium/arsenic formulations
BS 5666-4:1979 Methods of analysis of wood preservatives and treated timber. Quantitative analysis of preservatives and treated timber containing copper naphthenate
BS 5666-5:1986 Methods of analysis of wood preservatives and treated timber. Determination of zinc naphthenate in preservative solutions and treated timber
BS 5666-6:1983 Methods of analysis of wood preservatives and treated timber.
BS 5666-7:1991 Methods of analysis of wood preservatives and treated timber. Quantitative analysis of preservatives containing bis(tri-$in-butyltin)oxide : determination of total tin
BS 5667-1:1979 Specification for continuous mechanical handling equipment - safety requirements. General
BS 5667-10:1979 Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: vertical screw conveyors
BS 5667-11:1979 Specification for continuous mechanical handling equipment - safety requirements. Unit loads: fixed slat conveyors (metal or wood) with horizontal shafts
BS 5667-12:1979 Specification for continuous mechanical handling equipment - safety requirements. Unit loads: mobile slat conveyors (metal or wood) with horizontal shafts
BS 5667-13:1979 Specification for continuous mechanical handling equipment - safety requirements. Unit loads: arm elevators and push bar conveyors
BS 5667-14:1979 Specification for continuous mechanical handling equipment - safety requirements. Unit loads: live roller conveyors (with positive or friction drive)
BS 5667-15:1979 Specification for continuous mechanical handling equipment - safety requirements. Unit loads: crate-carrying chain conveyors having biplanar chains for flat-bottomed unit loads
BS 5667-16:1979 Specification for continuous mechanical handling equipment - safety requirements. Unit loads: slat band chain conveyors
BS 5667-17:1979 Specification for continuous mechanical handling equipment - safety requirements. Unit loads: continuous plate conveyors (horizontal)
BS 5667-18:1979 Specification for continuous mechanical handling equipment - safety requirements. Conveyors and elevators with chain-elements - examples for guarding of nip points
BS 5667-19:1980 Specification for continuous mechanical handling equipment - safety requirements. Belt conveyors - examples for guarding of nip points
BS 5667-2:1979 Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: pneumatic handling installations
BS 5667-3:1979 Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: storage equipment fed by a pneumatic handling system
BS 5667-4:1979 Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: mobile suction pipes suspended from derrick jibs used in pneumatic handling
BS 5667-5:1979 Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: couplings and hose components used in pneumatic handling
BS 5667-6:1979 Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: rotary feeders used in pneumatic handling
BS 5667-7:1979 Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: rotary drum feeders and rotary vane feeders
BS 5667-8:1979 Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: hand-operated power shovels
BS 5667-9:1979 Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: bulk throwing machines
BS 5668-1:2000 Routine analytical cigarette smoking machine. Definitions and standard conditions
BS 5668-2:1997 Routine analytical cigarette smoking machine. Methods of non-routine evaluation
BS 567:1973 Specification for asbestos-cement flue pipes and fittings, light quality
BS 5671:1979 Guide for commissioning, operation and maintenance of hydraulic turbines
BS 5672:1991 Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines
BS 5677:1979 Method (precision) for pressure calibration of one-inch standard condenser microphones by the reciprocity technique
BS 5682:1998 Specification for probes (quick connectors) for use with medical gas pipeline systems
BS 5683:1988 Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form C, for direct current, 3 or 4 terminals
BS 5684:1988 Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form D, for direct current, 3 or 4 terminals
BS 5685-2:1986 Electricity meters. Specification for single-phase coin operated prepayment flat rate and two-part tariff watt-hour meters of Class 2 and fixed charge collectors of Class 2
BS 5685-3:1986 Electricity meters. Specification for meters having Class 1 electro-mechanical maximum demand indicators
BS 5685-4:1986 Electricity meters. Specification for Class 3 var-hour meters
BS 5685-5:1987 Electricity meters. Specification for input and output switching or logic arrangements for multi-rate registers for electricity meters
BS 5685-8:1991 Electricity meters. Specification for impulse operated multiple registers for use with induction electricity meters
BS 5686:1986 Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements
BS 5688-0:1986 Methods of test for orthoboric acid (boric acid), $7Idi$7Rboron trioxide (boric oxide), $7Idi$7Rsodium tetraborates, sodium perborates and crude sodium borates for industrial use. General introduction
BS 5688-1:1979 Methods of test for orthoboric acid (boric acid), $7Idi$7Rboron trioxide (boric oxide), $7Idi$7Rsodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of boric acid content of boric acid
BS 5688-10:1979 Methods of test for orthoboric acid (boric acid), $7Idi$7Rboron trioxide (boric oxide), $7Idi$7Rsodium tetraborates, sodium perborates and crude sodium borates for industrial use.
BS 5688-11:1979 Methods of test for orthoboric acid (boric acid), $7Idi$7Rboron trioxide (boric oxide), $7Idi$7Rsodium tetraborates, sodium perborates and crude sodium borates for industrial use.
BS 5688-12:1979 Methods of test for orthoboric acid (boric acid), $7Idi$7Rboron trioxide (boric oxide), $7Idi$7Rsodium tetraborates, sodium perborates and crude sodium borates for industrial use.
BS 5688-13:1979 Methods of test for orthoboric acid (boric acid), $7Idi$7Rboron trioxide (boric oxide), $7Idi$7Rsodium tetraborates, sodium perborates and crude sodium borates for industrial use.
BS 5688-14:1979 Methods of test for orthoboric acid (boric acid), $7Idi$7Rboron trioxide (boric oxide), $7Idi$7Rsodium tetraborates, sodium perborates and crude sodium borates for industrial use.
BS 5688-15:1979 Methods of test for orthoboric acid (boric acid), $7Idi$7Rboron trioxide (boric oxide), $7Idi$7Rsodium tetraborates, sodium perborates and crude sodium borates for industrial use.





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.