BS 5982:1987 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 5982:1987 Onwards

Standard Official Title of Standard
BS 5982:1987 Method for determination of ground speed of earth-moving machinery
BS 5984:1980 Method for detection and determination of specified anti-oxidant additives in insulating oils
BS 5986:1980 Specification for electrical safety and performance of gas fired space heating appliances with inputs 60 kW to 2 MW
BS 5987:1980 Methods for sampling tea
BS 5990:1990 Specification for direct gas-fired forced convection air heaters with rated heat inputs up to 2 MW for industrial and commercial space heating
BS 5991:1989 Specification for indirect gas fired forced convection air heaters with rated heat inputs up to 2 MW for industrial and commercial space heating
BS 5992-1:1980 Electrical relays. Specification for contact performance of electrical relays
BS 5992-4:1983 Electrical relays. Specification for contact loads of preferred values used in endurance tests for electrical relay contacts
BS 5992-5:1983 Electrical relays. Specification for test equipment used in endurance tests for electrical relay contacts
BS 5992-6:1984 Electrical relays. Specification for the basic modules for the dimensions of general purpose all-or-nothing relays
BS 5993:1994 Specification for cricket balls
BS 5998:1983 Specification for quality levels for steel valve castings
BS 5999:1980 Specification for serials holdings statements for libraries and documentation centres
BS 5F 118:2002 50 g/m$u2 nylon parachute fabric
BS 5F 120:2002 Continuous filament nylon sewing threads for aerospace purposes
BS 5F 49:1991 Specification for shuttle woven cotton webbing for aerospace purposes
BS 5F 54:2002 Heavy duty linen (flax) sewing thread for aerospace purposes
BS 5F 58:2002 Cotton thread for aerospace purposes
BS 5F 59:2002 Braided linen (flax) cord for aerospace purposes
BS 5G 178-1:1993 Crimped joints for aircraft electrical cables and wires. Specification for design requirements (including tests) for components and tools
BS 5L 34:1985 Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
BS 5L 36:1985 Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter)
BS 5L 44:1985 Specification for forging stock, bars, extruded sections and forgings of aluminium-2$9D% magnesium alloy
BS 5M 23:1987 Specification for an identification scheme for pipelines
BS 5N 100-7:2002 Aircraft oxygen systems and equipment. Guide to cleaning labelling and packaging
BS 5S 100:1993 Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
BS 5S 15:1964 Specification for aircraft material. 3 per cent nickel case-hardening steel
BS 5S 21:1964 Specification for aircraft material. '20' carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension)
BS 5S 82:1976 Specification. 4% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1320-1520 MPa)
BS 5S 99:1994 Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forgings and parts (1230-1420 MPa: limiting ruling section 150 mm)
BS 5T 2:1972 Specification for 4/1 nickel-chromium steel tube (1300 N/mm$u2)
BS 5V 7:1952 Specification for mahogany for use in airscrews
BS 5X 17:1998 Specification for oleoresinous varnish for aerospace purposes
BS 600:2000 A guide to the application of statistical methods to quality and standardization
BS 6000-1:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. General guide to acceptance sampling
BS 6000-2:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Guide to sampling by attributes
BS 6000-3:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Guide to sampling by variables
BS 6001-0:1996 Sampling procedures for inspection by attributes. Introduction to the BS 6001 attribute sampling system
BS 6001-1:1999 Sampling procedures for inspection by attributes. Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS 6001-2:1993 Sampling procedures for inspection by attributes. Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection
BS 6001-3:2005 Sampling procedures for inspection by attributes. Specification for skip-lot sampling procedures
BS 6001-4:1994 Sampling procedures for inspection by attributes. Specification for sequential sampling plans
BS 6001-4:2005 Sampling procedures for inspection by attributes. System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS 6001-5:2002 Sampling procedures for inspection by attributes. Procedures for assessment of declared quality levels
BS 6001-7:2001 Sampling procedures for inspection by attributes. Credit-based accept-zero sampling schemes for the control of outgoing quality for lot-by-lot inspection
BS 6001-9:2002 Sampling procedures for inspection by attributes. Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
BS 6002-1:1993 Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
BS 6002-3:2005 Sampling procedures for inspection by variables. Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS 6002-4.1:1994 Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation
BS 6004:2000 Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring
BS 6005:1997 Specification for moulded transparent polycarbonate bowls used in compressed air filters and lubricators
BS 6007:2000 Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring
BS 6008:1980 Method for preparation of a liquor of tea for use in sensory tests
BS 6010-3:1994 Rolling bearings. Bearings with speherical outside surface and extended inner ring width. Specification for dimensions of cast and pressed housings
BS 6010-4:1993 Rolling bearings. Bearings with spherical outside surface and extended inner ring width. Specification for insert bearings and eccentric locking collars
BS 6014:2003 Ethylene propylene rubber compounds. Specification
BS 6019:1980 Recommendations for performance standards in building: contents and presentation
BS 6023:1981 Glossary of technical terms for automatic steam traps
BS 6031:1981 Code of practice for earthworks
BS 6035-2:1982 Methods for determination of the drainability of pulp. 'Canadian Standard' freeness method
BS 6037-1:2003 Code of practice for the planning, design, installation and use of permanently installed access equipment. Suspended access equipment
BS 6037-2:2004 Code of practice for the planning, design, installation and use of permanently installed access equipment. Travelling ladders and gantries
BS 6040:1981 Nomenclature for bolts, screws, nuts and accessories
BS 6041:1981 Method of sampling of electrodeposited metallic coatings and related finishes: procedures for inspection by attributes
BS 6043-1.1:2002 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling. Section 1.1: Sampling
BS 6043-1.10:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content. Section 1.10 Determination of volatile matter content
BS 6043-1.11:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of the atomic C/H ratio of the quinoline-insoluble material.
BS 6043-1.12:1994 Method of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of mesophase content
BS 6043-1.13:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content. Section 1.13 Determination of sulfur content
BS 6043-1.2:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of water content (Dean and Stark method)
BS 6043-1.3:1983 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of softening point (ring and ball method)
BS 6043-1.4:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of toluene-insoluble material
BS 6043-1.5:1983 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of quinoline-insoluble material
BS 6043-1.6:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value. Section 1.6 Determination of coking value
BS 6043-1.7:1988 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of apparent density (buoyancy method)
BS 6043-1.8:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash
BS 6043-1.9:1989 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur content (bomb method)
BS 6043-2.1:1985 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
BS 6043-2.10:1996 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of electrical resistivity of calcined coke granules
BS 6043-2.11:1995 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.