BS 6368:1983 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 6368:1983 Onwards

Standard Official Title of Standard
BS 6368:1983 Specification for axial lead cores made of magnetic oxides or iron powder
BS 6371:1983 Recommendations for citation of unpublished documents
BS 6374-1:1985 Lining of equipment with polymeric materials for the process idustries. Specification for lining with sheet thermoplastics
BS 6374-2:1984 Lining of equipment with polymeric materials for the process industries. Specification for lining with non-sheet applied thermoplastics
BS 6374-3:1984 Lining of equipment with polymeric materials for the process industries. Specification for lining with stoved thermosetting resins
BS 6374-4:1984 Lining of equipment with polymeric materials for the process industries. Specification for lining with cold curing thermosetting resins
BS 6374-5:1985 Lining of equipment with polymeric materials for the process industries. Specification for lining with rubbers
BS 6375-1:2004 Performance of windows and doors. Classification for weathertightness and guidance on selection and specification
BS 6375-2:1987 Performance of windows. Specification for operation and strength characteristics
BS 6376-1:1983 Reagents for chemical analysis. Methods of test
BS 6376-2:1984 Reagents for chemical analysis. Specifications (first series)
BS 6376-3:1989 Reagents for chemical analysis. Specifications (second series)
BS 6379-1:1983 Sampling of coffee and coffee products. Method of sampling green coffee in bags
BS 6379-3:1983 Sampling of coffee and coffee products. Specification for a coffee trier for sampling green coffee
BS 6379-4:1991 Sampling of coffee and coffee products. Method for preparation of samples of green coffee for use in sensory analysis
BS 6380:1997 Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869
BS 6381:1983 Specification for drawing boards
BS 6384:1983 Methods for determination of braking performance of agricultural and forestry vehicles
BS 638-4:1996 Arc welding power sources, equipment and accessories. Specification for welding cables
BS 638-5:1988 Arc welding power sources, equipment and accessories. Specification for accessories
BS 6385:1996 Machinery for forestry. Winches. Performance requirements
BS 6387:1994 Specification for performance requirements for cables required to maintain circuit integrity under fire conditions
BS 6388-1:1991 Accelerated ageing of paper and board. Method for dry heat treatment at 105$0DC
BS 6388-2:1987 Accelerated ageing of paper and board. Method for dry heat treatment at 120$0DC or 150$0DC
BS 6388-3:1996 Accelerated ageing of paper and board. Method for moist heat treatment at 80$0DC and 65% relative humidity
BS 6389:1983 Methods for determination of operator's field of vision for agricultural tractors
BS 6391:1983 Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes
BS 6392-0:1983 Testing of ethanol for industrial use. General introduction
BS 6392-1:1983 Testing of ethanol for industrial use. Method for detection of alkalinity or determination of acidity to phenolphthalein
BS 6392-2:1983 Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in small amounts (photometric method)
BS 6392-3:1983 Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method)
BS 6392-4:1983 Testing of ethanol for industrial use. Method for determination of aldehydes content
BS 6392-5:1983 Testing of ethanol for industrial use. Method of test for miscibility with water
BS 6392-6:1983 Testing of ethanol for industrial use. Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)] (photometric method)
BS 6392-7:1983 Testing of ethanol for industrial use. Method for determination of methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric method)
BS 6392-8:1983 Testing of ethanol for industrial use. Method for determination of esters content
BS 6392-9:1983 Testing of ethanol for industrial use. Method for determination of permanganate time
BS 6393:1987 Specification for calibration of stylus instruments
BS 6394-2:1985 Trace elements in milk and milk products. Method for the determination of iron content (reference method)
BS 6395:1983 Method for numerical designation of fabric faults by visual inspection
BS 6396:2002 Electrical systems in office furniture and office screens. Specification
BS 6397:1983 Specification for scales and sizes for plotting frequency characteristics and polar diagrams
BS 6398:1983 Specification for bitumen damp-proof courses for masonry
BS 6399-1:1996 Loading for buildings. Code of practice for dead and imposed loads
BS 6399-2:1997 Loading for buildings. Code of practice for wind loads
BS 6399-3:1988 Loading for buildings. Code of practice for imposed roof loads
BS 64:1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates
BS 6400:1997 Specification for installation of domestic sized gas meters (2nd and 3rd family gases)
BS 6400-1:2002 Specification for installation of domestic-sized gas meters maximum rated capacity not exceeding 6 m$u3/h (2nd and 3rd family gases). Low pressure (2nd family gases)
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS 6403:1983 Specification for simple telex terminals using single channel voice frequency signalling for connection to British Telecommunications telex network
BS 6404-12:1993 Magnetic materials. Guide to methods of assessment of temperature capability of interlaminar insulation coatings
BS 6404-13:1996 Magnetic materials. Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
BS 6404-20:1996 Magnetic materials. Resistance and temperature classification of insulation coatings
BS 6404-8.1:2001 Magnetic materials. Individual materials. Magnetically hard materials. Magnetically hard materials
BS 6404-8.6:1988 Magnetic materials. Individual materials. Specification for soft magnetic metallic materials
BS 6405:1984 Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes: class 1 and 2
BS 6407-1:1983 Cage pallets for retail use. Specification for collapsible cage pallets rated at 300 kg
BS 6407-2:1984 Cage pallets for retail use. Guide to the safe handling and use of collapsible cage pallets rated at 300 kg
BS 6408:1983 Specification for clothing made from coated fabrics for protection against wet weather
BS 641:1951 Dimensions of small rivets for general purposes
BS 6410:1991 Methods of test for filter papers
BS 6413-2:1983 Lubricants, industrial oils and related products (class L). Classification for family F (spindle bearings, bearings and associated clutches)
BS 6413-5:1988 Lubricants, industrial oils and related products (class L). Classification for family T (turbines)
BS 6413-6:1991 Lubricants, industrial oils and related products (class L). Classification for family C (gears)
BS 6413-7:1988 Lubricants, industrial oils and related products (class L). Classification for family M (metalworking)
BS 6413-8:1988 Lubricants, industrial oils and related products (class L). Classification for family R (temporary protection against corrosion)
BS 6416:1983 Nomenclature for assembly tools for screws and nuts
BS 6419:1983 Method for measurement of drawbar pull of earth-moving machinery
BS 6422:1983 Method for volumetric rating of loader and front loading excavator buckets used for earth-moving
BS 6423:1983 Code of practice for maintenance of electrical switchgear and controlgear for voltages up to and including 1 kV
BS 6429:1989 Method for conversion between the two coded character sets of BS 4730 (ISO 646) and BS 6692:Part 2 (ISO 6937-2) and the CCITT international telegraph alphabet No. 2 (ITA 2)
BS 643:1970 Specification for white metal ingots for capping steel wire ropes
BS 6431-1:1983 Ceramic floor and wall tiles. Specification for classification and marking, including definitions and characteristics
BS 6431-10:1984 Ceramic floor and wall tiles. Method for determination of dimensions and surface quality
BS 6431-11:1983 Ceramic floor and wall tiles. Method for determination of water absorption
BS 6431-12:1983 Ceramic floor and wall tiles. Method for determination of modulus of rupture
BS 6431-13:1986 Ceramic floor and wall tiles. Method for determination of scratch hardness of surface according to Mohs
BS 6431-14:1983 Ceramic floor and wall tiles. Method for determination of resistance to deep abrasion. Unglazed tiles
BS 6431-15:1983 Ceramic floor and wall tiles. Method for determination of linear thermal expansion





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.