BS 6591:1985 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 6591:1985 Onwards

Standard Official Title of Standard
BS 6591:1985 Specification for scraper bars for chain conveyors for mining
BS 6592:1985 Specification for drive sprocket assemblies for chain conveyors for mining
BS 6593:1985 Code of practice for on-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
BS 6599:1985 Method for determination of crushing strength of iron ore pellets
BS 6600-1:1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment.
BS 6600-10:1985 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment.
BS 6601:1985 Specification for mail payment orders
BS 6604:1985 Code of practice for safe operation of starter batteries
BS 6605:1990 Specification for cross recesses for screws
BS 6606:1987 Methods for sampling oilseed residues
BS 6607-1:1985 Tool shanks with 7/24 taper for automatic tool changers. Specification for shanks Nos. 40, 45, and 50
BS 6607-2:1985 Tool shanks with 7/24 taper for automatic tool changers. Specification for retention knobs for shanks Nos. 40, 45 and 50
BS 6607-3:1993 Tool shanks with 7/24 taper for automatic tool changers. Specification for tapers for spindle noses
BS 6607-4:1994 Tool shanks with 7/24 taper for automatic tool changers. Specification for functional dimensions of front faces of spindle holders for machine centres
BS 6608:1985 Specification for cattle hide leathers for upholstered furniture
BS 6610:1996 Specification for Pozzolanic pulverized-fuel ash cement
BS 6611:1985 Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
BS 6612:1985 Specification for graduated compression hosiery
BS 6613:1985 Methods for specifying characteristics of resilient shaft couplings
BS 6615:1996 Specification for dimensional tolerances for metal and metal alloy castings
BS 6616:1986 Specification for paper and print for optical character recognition (OCR)
BS 6620-1:1991 Industrial plate screens. Guide for screens of thickness 3 mm and above
BS 6620-2:1991 Industrial plate screens. Guide for screens of thickness below 3 mm
BS 662-1:1979 Carbon disulphide for industrial use. Specification
BS 662-2:1978 Carbon disulphide for industrial use. Sampling and methods of test
BS 6622:1999 Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV
BS 662-3:1979 Carbon disulphide for industrial use. Additional methods of test
BS 6626:1985 Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV
BS 6627:1985 Recommendations for presentation of headers for microfiche of monographs and serials
BS 6628:1985 Method for determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
BS 6630:1985 Method for identification of antidegradants in rubber and rubber products by thin layer chromatography
BS 6632:1985 Method for measurement and reporting of shipboard vibration data
BS 6633:1985 Method for measurement and reporting of local vibration data of ship structures and equipment
BS 6635:2003 Manufacture of saddle trees made from wood. Specification
BS 6638-2:1989 Guide to transmission signal quality at DTE/DCE interfaces. Synchronous transmission
BS 6642:1985 Specification for disposable plastics refuse sacks made from polyethylene
BS 6643-1:1985 Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers'). Specification for procedure and materials
BS 6643-2:1985 Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers'). Specification for powder refill charges
BS 6644:2005 Specification for Installation of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
BS 6645:1985 Method for determination of alkali solubility of flax materials
BS 6646:1985 Method for determination of ash of textiles
BS 6647:1985 Guide to oscilloscopes and peak voltmeters for impulse tests
BS 6648:1986 Methods for wet ashing of textile materials for subsequent determination of metal content
BS 6649:1985 Specification for clay and calcium silicate modular bricks
BS 6651:1999 Code of practice for protection of structures against lightning
BS 6652:1985 Specification for packagings resistant to opening by children
BS 6653:1985 Method for expression of the properties of logic analyzers
BS 6654:1985 Method for determination of the electrical resistivity of textile floor coverings
BS 6655:1986 Specification for pure tone air conduction threshold audiometry for hearing conservation purposes
BS 6656:2002 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
BS 6658:1985 Specification for protective helmets for vehicle users
BS 6660-1:2005 Guide to setting up and maintaining micrographics and digital imaging units. Micrographics
BS 6662:1985 Guide to methods of measurement of short duration transients on low voltage power and signal lines
BS 6663:1986 Methods for determination of crimp rigidity of textured nylon yarns
BS 6669-1:1986 Methods of test for electroplated silver and silver alloy coatings. Determination of coating thickness
BS 6669-2:1986 Methods of test for electroplated silver and silver alloy coatings. Adhesion tests
BS 6669-3:1989 Methods of test for electroplated silver and silver alloy coatings. Detection of residual salts
BS 667:2005 Illuminance meters. Requirements and test methods
BS 6670-1:1986 Methods of test for electroplated gold and gold alloy coatings. Determination of coating thickness
BS 6670-4:1986 Methods of test for electroplated gold and gold alloy coatings. Determination of gold content
BS 6670-5:1986 Methods of test for electroplated gold and gold alloy coatings. Adhesion tests
BS 6674:1985 Specification for disposable micropipettes
BS 6675:1986 Specification for servicing valves (copper alloy) for water services
BS 6680:1985 Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp
BS 6683:1985 Guide to installation and use of valves
BS 6684:1989 Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking
BS 669-1:1989 Flexible hoses, end fittings and sockets for gas burning appliances.
BS 669-2:1997 Flexible hoses, end fittings and sockets for gas burning appliances.
BS 6696:1986 Methods for use and testing of capacity of volumetric glassware
BS 6699:1992 Specification for ground granulated blastfurnace slag for use with Portland cement
BS 67:1987 Specification for ceiling roses
BS 6700:1997 Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages
BS 6701:2004 Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance
BS 6704:1996 Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines
BS 6705:1987 Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines
BS 6706:1986 Specification for disposable glass serological pipettes
BS 6708:1998 Flexible cables for use at mines and quarries
BS 6709:1986 Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp
BS 6710:1987 Specification for dimensions of chain wheel tooth forming tools
BS 6711-1:1986 Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica. Names for items of apparatus





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.