BS 6938:1988 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 6938:1988 Onwards

Standard Official Title of Standard
BS 6938:1988 Recommendations for documentation of the preparation of certified reference materials for metallurgical analysis of non-ferrous metals
BS 6940-1:1989 Total Access Communication System (T.A.C.S). Specification for performance requirements for mobile stations
BS 6940-2:1989 Total Access Communication System (T.A.C.S). Specification for performance and tests of the signalling system of mobile stations
BS 6941:1988 Specification for electrical apparatus for explosive atmospheres with type of protection N
BS 6942-2:1989 Design and construction of small kits for oxy-fuel gas welding and allied processes. Specification for kits using refillable gas containers for oxygen and fuel gas
BS 6943:1988 Classification of shapes of electronic components for placement on printed wiring boards
BS 6944:1988 Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)
BS 6946:1988 Specification for metal channel cable support systems for electrical installations
BS 6947:1988 Specification for acid oils and recovered fatty acid distillates
BS 6948:1989 Methods of test for mechanically fastened joints in timber and wood-based materials
BS 6949:1991 Specification for bitumen-based coatings for cold application excluding use in contact with potable water
BS 6953:1988 Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)
BS 6954-1:1988 Tolerances for building. Recommendations for basic principles for evaluation and specification
BS 6954-2:1988 Tolerances for building. Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes
BS 6954-3:1988 Tolerances for building. Recommendations for selecting target size and predicting fit
BS 6955-1:1994 Calibration of vibration and shock pick-ups. Methods for primary vibration calibration by laser interferometry
BS 6955-10:1994 Calibration of vibration and shock pick-ups. Method for primary calibration by high impact shocks
BS 6955-11:1994 Calibration of vibration and shock pick-ups. Method of test for transverse vibration sensitivity
BS 6955-12:1994 Calibration of vibration and shock pick-ups. Method of test for transverse shock sensitivity
BS 6955-13:1994 Calibration of vibration and shock pick-ups. Method of test for base strain sensitivity
BS 6955-14:1994 Calibration of vibration and shock pick-ups. Method of test for resonance frequency of undamped accelerometers on a steel block
BS 6955-15:1994 Calibration of vibration and shock pick-ups. Method of test for acoustic sensitivity
BS 6955-16:1994 Calibration of vibration and shock pick-ups. Method of test for mounting torque sensitivity
BS 6955-17:1994 Calibration of vibration and shock pick-ups. Method of test for fixed temperature sensitivity
BS 6955-18:1994 Calibration of vibration and shock pick-ups. Method of test for transient temperature sensitivity
BS 6955-19:1994 Calibration of vibration and shock pick-ups. Method of test for magnetic field sensitivity
BS 6955-2:1994 Calibration of vibration and shock pick-ups. Methods for primary shock calibration by light cutting
BS 6955-22:1997 Calibration of vibration and shock pick-ups. Accelerometer resonance testing. General methods
BS 6955-5:1994 Calibration of vibration and shock pick-ups. Method for calibration by earth's gravitation
BS 6955-6:1994 Calibration of vibration and shock pick-ups. Method for primary vibration calibration at low frequencies
BS 6955-7:1994 Calibration of vibration and shock pick-ups. Methods for primary calibration by centrifuge
BS 6955-8:1994 Calibration of vibration and shock pick-ups. Method for primary calibration by dual centrifuge
BS 6955-9:1994 Calibration of vibration and shock pick-ups. Method for secondary vibration calibration by comparison of phase angles
BS 6956-1:1988 Jointing materials and compounds. Specification for corrugated metal joint rings
BS 6956-5:1992 Jointing materials and compounds. Specification for jointing compounds for use with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd family gases
BS 6958-1:1988 Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each side.
BS 6958-2:1988 Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each side.
BS 696-1:1989 Determination of fat content of milk and milk products (Gerber method). Specification for apparatus
BS 696-2:1989 Determination of fat content of milk and milk products (Gerber method). Methods
BS 6965-1:1988 Creasing properties of carton board. Method for determination of crease recovery (spring back) of 90$0D fold
BS 697:1986 Specification for rubber gloves for electrical purposes
BS 6972:1988 Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use
BS 6978-1:1988 Seed drills. Methods of test for single seed drills
BS 6978-2:1990 Seed drills. Methods of test for seed drills for rows
BS 6979:1989 Method for measurement of static deflection of power presses
BS 6981:1988 Method for determination of acid content of wool
BS 6985:1989 Specification for dual-scale and ovulation clinical maximum thermometers (mercury-in-glass, enclosed scale)
BS 6986-1:1988 Analysis of instant tea. Methods of sampling
BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
BS 6986-3:1990 Analysis of instant tea. Method for determination of moisture content (loss in mass at 103$0DC)
BS 6986-4:1990 Analysis of instant tea. Method for determination of total ash
BS 6989:1989 Guide to safety of storage equipment for loose bulk materials
BS 6990:1989 Code of practice for welding on steel pipes containing process fluids or their residuals
BS 6991:1990 Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment
BS 6993-2:1990 Thermal and radiometric properties of glazing. Method for direct measurement of $7IU$7R-value (thermal transmittance)
BS 6995:1997 Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)
BS 6996:2003 Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification
BS 6997:1990 Specification for elastomeric toroidal sealing rings ('O'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996
BS 6999:1989 Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW
BS 6F 100:1998 Procedure for inspection and testing of textiles for aerospace purposes
BS 6F 37:1990 Specification for 570 g/m$u2 and 640 g/m$u2 cotton canvas fabrics for aerospace purposes
BS 6F 55:1991 Specification for 345 g/m$u2 and 415 g/m$u2 cotton canvas fabrics suitable for aerospace purposes
BS 6G 205-1:1995 Secondary batteries for aircraft. Specification for lead-acid batteries
BS 6L 16:1985 Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)
BS 6L 17:1985 Specification for sheet and strip of 99% aluminium (temper designation-O)
BS 6SP 4:2000 Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880 / 1 080 MPa
BS 6V 3:1943 Specification for aircraft material. High strength plywood for aircraft
BS 6W 8:1938 Tie rods (swaged) (No. 4 B.A. to $9H inch B.S.F. inclusive) for aircraft purposes
BS 7000-1:1999 Design management systems. Guide to managing innovation
BS 7000-10:1995 Design management systems. Glossary of terms used in design management
BS 7000-2:1997 Design management systems. Guide to managing the design of manufactured products
BS 7000-3:1994 Design management systems. Guide to managing service design
BS 7000-4:1996 Design management systems. Guide to managing design in construction
BS 7000-5:2001 Design management systems. Design management systems. Guide to managing obsolescence
BS 7000-6:2005 Design management systems. Managing inclusive design. Guide
BS 700-1:1982 Graduated pipettes. Specification for general requirements
BS 7001:1988 Specification for interchangeability and safety of a standardized luminaire supporting coupler
BS 700-2:1982 Graduated pipettes. Specification for pipettes for which no waiting time is specified
BS 700-3:1982 Graduated pipettes. Specification for blow-out pipettes
BS 7005:1988 Specification for design and manufacture of carbon steel unfired pressure vessels for use in vapour compression refrigeration systems





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.