BS 7177:1996 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 7177:1996 Onwards

Standard Official Title of Standard
BS 7177:1996 Specification for resistance to ignition of mattresses, divans and bed bases
BS 718:1991 Specification for density hydrometers
BS 7181:1989 Specification for storage cisterns up to 500 L actual capacity for water supply for domestic purposes
BS 7183:1989 Guide to design of test rooms for sensory analysis of food
BS 7184:2001 Selection, use and maintenance of chemical protective clothing. Guidance
BS 7188:1998 Impact absorbing playground surfacing. Performance requirements and test methods
BS 7190:1989 Method for assessing thermal performance of low temperature hot water boilers using a test rig
BS 7193:1989 Specification for lined lightweight rubber overshoes and overboots
BS 7194:1990 Specification for direct-current and low-frequency electronic measuring instruments with a digital display
BS 7195:1989 Guide for prevention of corrosion of metals caused by vapours from organic materials
BS 7197:1990 Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV
BS 7198-1:1989 Hydraulic fluid power quick-action couplings. Specification for dimensions and performance
BS 7200:1989 Specification for synthetic-fibre needlefelts
BS 7201-1:1989 Hydraulic fluid power. Gas loaded accumulators. Specification for seamless steel accumulator bodies above 0.5 L water capacity
BS 7202:1989 Specification for non-incendive low voltage control/interlock and low voltage earth fault monitoring circuits for use in mines
BS 7206:1990 Specification for unvented hot water storage units and packages
BS 7207:1990 Specification for crude vegetable fats
BS 7208-2:1991 Contact lenses. Method of classifying contact lens materials
BS 7209:1990 Specification for water vapour permeable apparel fabrics
BS 721-1:1963 Specification for worm gearing. Imperial units
BS 7211:1998 Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring
BS 721-2:1983 Specification for worm gearing. Metric units
BS 7212:1989 Code of practice for safe use of construction hoists
BS 7216:1989 Classification and interpretation of new lighting products
BS 7221:1989 Open systems interconnection: specification for internal organization of the Network Layer
BS 7225-2.1:1990 Classification of refractories. Unshaped refractory products. Alumina, silica and alumino-silicate products
BS 7225-2.2:1990 Classification of refractories. Unshaped refractory products. Basic products
BS 7225-3.1:1990 Classification of refractories. Ceramic fibre products. Blankets, mats, felts and paper
BS 7227:1990 Procedures for the application of ISO 7812 to allocate UK Issuer Identification Numbers (UK IINs) for use on identification cards
BS 7228-6:1992 Industrial robots. Recommendations for safety
BS 7230:1989 Code of practice for article theft detection systems
BS 7231-1:1990 Body measurements of boys and girls from birth up to 16.9 years. Information in the form of tables
BS 7231-2:1990 Body measurements of boys and girls from birth up to 16.9 years. Recommendations of body dimensions for children
BS 7236:1989 Code of practice for non-reclosable packaging for solid dose units of medicinal products
BS 7237:1990 Specification for binary floating point arithmetic for microprocessor systems
BS 7238:1990 Glossary for terminology related to microprocessors
BS 7241:1989 Specification for IEC 822 VSB: parallel sub-system bus of the IEC 821 VME bus
BS 7243-1:1989 Refractory raw materials. Method of sampling
BS 7244:1990 Specification for flame arresters for general use
BS 7245:1989 Specification for numeric keyboard for home electronic systems (HES)
BS 7246:1990 Guide for local area networks CSMA/DC 10 M bits/s baseband planning and installation
BS 7247:1990 Guide for characteristics of local area networks (LAN)
BS 7250:1989 Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors
BS 7251-1:1990 Orthopaedic joint prostheses. Specification for general requirements
BS 7251-10:1992 Orthopaedic joint prostheses. Method of determination of endurance properties of the head and neck region of stemmed femoral components of hip joint prostheses
BS 7251-12:1995 Orthopaedic joint prostheses. Specification for endurance of stemmed femoral components with application of torsion
BS 7251-13:1995 Orthopaedic joint prostheses. Method for determination of resistance to torque of head fixation of stemmed femoral components
BS 7251-14:1998 Orthopaedic joint prostheses. Components for partial and total knee-joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials
BS 7251-2:1995 Orthopaedic joint prostheses. Specification for classification, definitions and designation of dimensions of femoral and tibial components for partial and total knee joint prostheses
BS 7251-3:1997 Orthopaedic joint prostheses. Specification for classification and designation of dimensions for hip joint prostheses
BS 7251-4:1997 Orthopaedic joint prostheses. Specification for articulating surfaces made of metallic, ceramic and plastics materials of hip joint prostheses
BS 7251-7:1990 Orthopaedic joint prostheses. Guide to hip joint simulators
BS 7251-8:1990 Orthopaedic joint prostheses. Guide to laboratory evaluation of change of form of bearing surfaces of hip joint prostheses
BS 7252-1:1997 Metallic materials for surgical implants. Specification for wrought stainless steel
BS 7252-10:1997 Metallic materials for surgical implants. Specification for wrought titanium 5-aluminium 2,5-iron alloy
BS 7252-11:1995 Metallic materials for surgical implants. Specification for wrought titanium 6-aluminium 7-niobium alloy
BS 7252-12:1997 Metallic materials for surgical implants. Specification for wrought cobalt-chromium-molybdenum alloy
BS 7252-13:1997 Metallic materials for surgical implants. Specification for unalloyed tantalum for surgical implant applications
BS 7252-3:1997 Metallic materials for surgical implants. Specification for wrought titanium 6-aluminium 4-vanadium alloy
BS 7252-4:1997 Metallic materials for surgical implants. Specification for cobalt-chromium-molybdenum casting alloy
BS 7252-5:1994 Metallic materials for surgical implants. Specification for wrought cobalt-chromium-tungsten-nickel alloy
BS 7252-6:1997 Metallic materials for surgical implants. Specification for wrought cobalt-nickel-chromium-molybdenum alloy
BS 7252-7:1994 Metallic materials for surgical implants. Specification for cobalt-chromium-nickel-molybdenum-iron alloy
BS 7252-8:1997 Metallic materials for surgical implants. Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
BS 7252-9:1993 Metallic materials for surgical implants. Specification for high-nitrogen stainless steel
BS 7253-2:1997 Non-metallic materials for surgical implants. Specification for ceramic materials based on high purity alumina
BS 7253-3:1990 Non-metallic materials for surgical implants. Specification for surgical implants made of heat-vulcanized silicone elastomer
BS 7253-6:1997 Non-metallic materials for surgical implants. Specification for ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
BS 7254-2:1990 Orthopaedic implants. Specification for general requirements for materials and finish
BS 7254-3:1990 Orthopaedic implants. Recommendations for care and handling
BS 7254-4:1990 Orthopaedic implants. Recommendations for retrieval and examination of implants and associated tissues
BS 7254-5:1990 Orthopaedic implants. Specification for production of castings made of cobalt-chromium-molybdenum alloy
BS 7254-6.2:1990 Orthopaedic implants. Forgings. Method for specifying forgings
BS 7255:2001 Code of practice for safe working on lifts
BS 7256:1990 Specification for roomheaters burning wood logs
BS 7258-1:1994 Laboratory fume cupboards. Specification for safety and performance
BS 7258-2:1994 Laboratory fume cupboards. Recommendations for the exchange of information and recommendations for installation
BS 7258-3:1994 Laboratory fume cupboards. Recommendations for selection, use and maintenance
BS 7258-4:1994 Laboratory fume cupboards. Method for determination of the containment value of a laboratory fume cupboard
BS 7262:1990 Specification for automatic safe load indicators





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.