BS 7404-4:1991 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 7404-4:1991 Onwards

Standard Official Title of Standard
BS 7404-4:1991 Telecontrol equipment and systems. Specification for performance
BS 7405:1991 Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
BS 7406:1991 Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods
BS 7407:1991 Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children
BS 7409:1996 Specification for safety requirements for wheeled child conveyances
BS 7410:1991 Glossary of terms used in industrial screening
BS 7411:1991 Specification for lever operated knapsack sprayers
BS 7412:2002 Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification
BS 7414:1991 Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B
BS 7416:1991 Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
BS 7417:1991 Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
BS 7419:1991 Specification for holding down bolts
BS 7420:1991 Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)
BS 7423:1999 Specification for safety requirements for children's travel cots of internal base length not less than 900 mm
BS 7424:1991 Guide to general principles for determination of the bending stiffness of paper and board by static methods
BS 7425-2:1991 Abrasive grains. Method for determining the capillarity
BS 7425-3:1993 Abrasive grains. Method for sampling and splitting
BS 7425-4:1993 Abrasive grains. Specification for test-sieving machines
BS 7427:1991 Method for determination of titanium dioxide content of paper and board
BS 7429:1991 Specification for television receivers and monitors for use in education and training
BS 743:1970 Specification for materials for damp-proof courses
BS 7430:1998 Code of practice for earthing
BS 7431:1991 Method for assessing solar water heaters. Elastomeric materials for absorbers, connecting pipes and fittings
BS 7433-1:1991 Cross recessed machine screws. Specification for pan head screws of product grade A
BS 7433-2:1991 Cross recessed machine screws. Specification for countersunk flat head screws product grade A and property class 4.8 only
BS 7433-3:1991 Cross recessed machine screws. Specification for raised countersunk head screws product grade A
BS 7436:1996 Specification for data transfer between agricultural tractors and attached machinery (data bus protocol)
BS 7438:1991 Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
BS 7439:1991 Method for exchange of information for the analytical assessment of shock resistance of mechanical systems
BS 7440:1991 Method for calibrating field pyrheliometers by comparison to a reference pyrheliometer
BS 7442-0:1991 Rubber or plastics covered rollers. Introduction
BS 7442-1:1991 Rubber or plastics covered rollers. Glossary of terms
BS 7442-2:1991 Rubber or plastics covered rollers. Recommendations for technical information to be provided by the purchaser
BS 7442-3.1:1998 Rubber or plastics covered rollers. Method of test. Determination of apparent hardness (IRHD method)
BS 7442-3.2:1991 Rubber or plastics covered rollers. Method of test. Determination of Shore hardness
BS 7442-3.3:1992 Rubber or plastics covered rollers. Method of test. Determination of apparent hardness by the Pusey and Jones method
BS 7442-4.1:1992 Rubber or plastics covered rollers. Requirements. Specification for apparent hardness
BS 7442-4.2:1994 Rubber or plastics covered rollers. Requirements. Classification by surface finish
BS 7442-4.3:1993 Rubber or plastics covered rollers. Requirements. Specification for dimensional tolerances
BS 7444:1991 Specification for molecular sieves (of type 4A)
BS 7445-1:2003 Description and measurement of environmental noise. Guide to quantities and procedures
BS 7445-2:1991 Description and measurement of environmental noise. Guide to the acquisition of data pertinent to land use
BS 7445-3:1991 Description and measurement of environmental noise. Guide to application to noise limits
BS 7446:1991 Specification for lead chromate pigments and lead chromate-molybdate pigments for paints
BS 7448-1:1991 Fracture mechanics toughness tests. Method for determination of $iK$dI$dc critical CTOD and critical $iJ values of metallic materials
BS 7448-2:1997 Fracture mechanics toughness tests. Method for determination of $iK$dI$dc, critical CTOD and critical $iJ values of welds in metallic materials
BS 7448-3:2005 Fracture mechanics toughness tests. Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
BS 7448-4:1997 Fracture mechanics toughness tests. Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
BS 7449:1991 Specification for inclusion of glass in the construction of furniture, other than tables or trolleys, including cabinets, shelving systems and wall hung or free standing mirrors
BS 7450:1991 Method for determination of economic optimization of power cable size
BS 7451:1991 Specification for archival quality bookbinding leather
BS 7452:1991 Specification for separating transformers, autotransformers, variable transformers and reactors
BS 7453-1:1991 Procedures for UK registration for Open Systems standards. Procedures for the UK Name Registration Authority
BS 7454:1991 Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
BS 7455-1:1991 Analysis of nickel alloys by flame atomic absorption spectrometry. General requirements and sample dissolution
BS 7455-2:1991 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of cobalt
BS 7455-3:1991 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of chromium
BS 7455-4:1991 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of copper
BS 7455-5:1991 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of iron
BS 7455-6:1991 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of manganese
BS 7455-7:1992 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of aluminium
BS 7455-8:1992 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of silicon
BS 7455-9:1994 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of vanadium
BS 7456:1991 Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems
BS 7457:1994 Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves
BS 7459-1:1995 Rotating sprinklers for irrigation equipment. Specification for design and operational requirements
BS 7459-2:1991 Rotating sprinklers for irrigation equipment. Methods of test for uniformity of distribution
BS 746:2005 Fittings for installation of low pressure gas meters. Requirements and test methods
BS 7460:1991 Code of practice for use of spray extraction machines on carpets and soft floor coverings in hospitals
BS 7461:1991 Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
BS 7462:1991 Specification for electrical safety of domestic gas appliances
BS 7463-1:1991 Fibre furnish analysis of paper, board and pulps. General method
BS 7463-2:1991 Fibre furnish analysis of paper, board and pulps. Guide to staining
BS 7463-3:1991 Fibre furnish analysis of paper, board and pulps. Method of test by Herzberg stain
BS 7463-4:1991 Fibre furnish analysis of paper, board and pulps. Method of test by Graff 'C' stain
BS 7463-5:1991 Fibre furnish analysis of paper, board and pulps. Method of test by Lofton-Merritt stain (Wisbar modification)
BS 7463-6:1995 Fibre furnish analysis of paper, board and pulps. Determination of fibre coarseness
BS 7463-7:1995 Fibre furnish analysis of paper, board and pulps. Determination of weight factors
BS 7464:1991 Specification for anchor winches for mobile offshore units
BS 7465:1991 Glossary of terms for ships windows and side scuttles





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.