BS 7671:2001 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 7671:2001 Onwards

Standard Official Title of Standard
BS 7671:2001 Requirements for electrical installations. IEE Wiring Regulations. Sixteenth edition
BS 7672:1993 Specification for compression, stiffness and labelling of anti-embolism hosiery
BS 7674:1993 Nuclear power plants. Instrumentation and control systems important for safety. Requirements for electrical supplies
BS 7675:1993 Plain bearings. Thin-walled half bearings. Checking of peripheral length
BS 7676-2:1993 Acceptance code for gears. Determination of mechanical vibrations of gear units during acceptance testing
BS 7677:1993 Recommendations for classification of imperfections in pipe joint rings
BS 7679:1993 Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
BS 768:1958 Specification for slotted grub screws
BS 7686:1993 Test methods for submerged-arc furnaces
BS 7688:1993 Test methods for electro-slag remelting furnaces
BS 7689:1993 Test methods for electroheating installations with electron guns
BS 7690:1993 Test methods for induction channel furnaces
BS 7691:1994 Methods for testing resistance to environmental conditions of electronic equipment used in agriculture and horticulture
BS 7693:1993 Guide to uses of infra-red transmission and the prevention or control of interference between systems
BS 7694:1993 Glossary of terms for test sieves and test sieving
BS 7697:1993 Nominal voltages for low voltage public electricity supply systems
BS 7698-1:1993 Reciprocating internal combustion engine driven alternating current generating sets. Specification for application, ratings and performance
BS 7698-10:1999 Reciprocating internal combustion engine driven alternating current generating sets. Measurement of airborne noise by the enveloping surface method
BS 7698-12:1998 Reciprocating internal combustion engine driven alternating current generating sets. Emergency power supply to safety devices
BS 7698-2:1993 Reciprocating internal combustion engine driven alternating current generating sets. Specification for engines
BS 7698-3:1993 Reciprocating internal combustion engine driven alternating current generating sets. Specification for alternating current generators for generating sets
BS 7698-4:1993 Reciprocating internal combustion engine driven alternating current generating sets. Specification for controlgear and switchgear
BS 7698-5:1993 Reciprocating internal combustion engine driven alternating current generating sets. Specification for generating sets
BS 7698-6:1993 Reciprocating internal combustion engine driven alternating current generating sets. Test methods
BS 7698-7:1996 Reciprocating internal combustion engine driven alternating current generating sets. Technical declarations for specification and design
BS 7698-8:1996 Reciprocating internal combustion engine driven alternating current generating sets. Requirements and tests for low-power generating sets
BS 7698-9:1996 Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations
BS 7699-8:1994 Specification for safety in electroheat installations. Particular requirements for electro-slag remelting furnaces
BS 7700:1994 Micaceous iron oxide pigments for paints. Specifications and test methods
BS 770-1:1986 Methods for chemical analysis of cheese. General introduction
BS 7701:1993 Specification for float-type level gauges for measuring liquid levels in tanks containing refrigerated light-hydrocarbon fluids
BS 770-11:1997 Methods for chemical analysis of cheese. Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents in processed cheese and processed cheese products
BS 770-2:1976 Methods for chemical analysis of cheese. Determination of water content (reference and routine methods)
BS 7702:1993 Guide to volumetric metering of viscous hydrocarbons
BS 7704:1993 Specifications for silicone liquids for electrical purposes
BS 770-5:1976 Methods for chemical analysis of cheese. Determination of pH value
BS 7705:1993 Specification for brake systems for special wheeled forestry machines
BS 770-6:1984 Methods for chemical analysis of cheese. Determination of total phosphorus content. Molecular absorption spectrometric method
BS 7706:1993 Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for the detection, location and sizing of flaws
BS 7707:1993 Specification for power presses, mechanical straight-sided single-action type from 400 kN up to and including 4000 kN nominal force
BS 770-7:1997 Methods for chemical analysis of cheese. Determination of citric acid content of cheese and processed cheese products (enzymatic method)
BS 770-8:1987 Methods for chemical analysis of cheese. Determination of nitrogen content (reference method)
BS 7708:1993 Specification for power presses, mechanical straight-sided high-speed type of 250 kN up to 4000 kN nominal force
BS 770-9:1985 Methods for chemical analysis of cheese. Determination of nitrate and nitrite contents. Cadmium reduction and photometry method
BS 7709-1:1993 Analysis of extract solutions of glass. Method for determination of silicon dioxide by molecular absorption spectrometry
BS 7709-2:1993 Analysis of extract solutions of glass. Method for determination of sodium oxide and potassium oxide by flame spectrometric methods
BS 7709-3:1993 Analysis of extract solutions of glass. Method for determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry
BS 7709-4:1993 Analysis of extract solutions of glass. Method for determination of aluminium oxide by molecular absorption spectrometry
BS 7709-5:1993 Analysis of extract solutions of glass. Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
BS 7709-6:1993 Analysis of extract solutions of glass. Method for determination of boron (III) oxide by molecular absorption spectrometry
BS 771:1992 Specification for phenolic moulding materials
BS 7710-1:1993 Urine absorbing aids. Vocabulary. Conditions of urinary incontinence
BS 7710-2:1993 Urine absorbing aids. Vocabulary. Products
BS 7710-3:1993 Urine absorbing aids. Vocabulary. Identification of product types
BS 7713:1993 Guide for the maintenance of silicone transformer liquids
BS 7714:2005 Care and handling of seals for fluid power applications. Guide
BS 7715:1994 Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread
BS 7719:1994 Specification for water-borne emulsion paints for interior use
BS 7722:2002 Surface covered PVC-U profiles for windows and doors. Specification
BS 7723-2:1994 Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Optical-reference-line method
BS 7723-3:1994 Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Optical-triangulation method
BS 7723-4:1995 Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Internal electro-optical distance-ranging method
BS 7724:1994 Specification for split pins (metric series)
BS 7725-1:1994 Evaluation and routine testing in medical imaging departments. General
BS 7725-2.1:1994 Evaluation and routine testing in medical imaging departments. Constancy tests. Method for film processors
BS 7725-2.2:1994 Evaluation and routine testing in medical imaging departments. Constancy tests.
BS 7725-2.3:1994 Evaluation and routine testing in medical imaging departments. Constancy tests. Method for darkroom safelight conditions
BS 7727:1994 Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm$u2 (10AWG)
BS 7729:1994 Specification for instrument transformers. Three-phase voltage transformers for voltage levels having $iU$dm up to 52 kV
BS 7730:1994 Method for liquid penetrant inspection of metallic surgical implants
BS 7731:1994 Method for radiographic examination of cast metallic surgical implants
BS 7735:1994 Guide to loading of oil-immersed power transformers
BS 7737-1:1995 Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. General
BS 7737-2:1995 Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Resonance methods
BS 7738-1:1994 Specification for information systems products using SSADM (Structured Systems Analysis and Design Method). Implementation of SSADM version 4
BS 7744:1994 Guide to artificial pollution tests on high voltage insulators to be used on d.c. systems
BS 7745-1:1994 End mills with brazed helical hardmetal tips. Dimensions of end mills with parallel shank
BS 7745-2:1994 End mills with brazed helical hardmetal tips. Dimensions of end mills with taper shank
BS 7747:1994 Forestry machinery. Portable brush cutters and grass trimmers. Cutting attachment guard strength
BS 7751-1:1994 Prevailing torque type wire thread inserts. Specification for ISO metric coarse pitch threads





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.