BS 8434-2:2003 -
The StandardsDirect Glossary of British Standards
BS STANDARDS GLOSSARY
bs standards, iso standards, iec standards, en standards
Glossary of EN, IEC, ISO and BS Standards

BS 8434-2:2003 Onwards

Standard Official Title of Standard
BS 8434-2:2003 Methods of test for assessment of the fire integrity of electric cables. Test for unprotected small cables for use in emergency circuits. BS EN 50200 with a 930$0DC flame and with water spray
BS 8435:2005 Small craft. Reserve flotation. Boats up to six metres length of hull
BS 8436:2004 Electric cables. 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables
BS 8437:2005 Code of practice for selection, use and maintenance of personal fall protection systems and equipement for use in the workplace
BS 8438:2004 Troughed belt conveyors. Specification
BS 8439:2005 Continuous handling equipment and systems. Guide to properties of powders and bulk materials
BS 8440-1:2005 Health informatics. Medical digital imaging. Profiles format. General principles
BS 8440-2:2005 Health informatics. Medical digital imaging. Profiles format. Particular requirements for metadata profiles
BS 8444-3:1996 Risk management. Guide to risk analysis of technological systems
BS 8446:2005 Specification for the installation and maintenance of open-flued, non-domestic gas-fired laundry appliances
BS 8447:2005 Anaesthetic and respiratory equipment. Hook-on fittings for the attachment of vaporizers to an anaesthetic gas delivery device
BS 8449:2005 Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures
BS 845-1:1987 Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids. Concise procedure
BS 8451:2004 Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
BS 845-2:1987 Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids. Comprehensive procedure
BS 8452:2005 Use of clamp-on (externally mounted) transit time metering techniques for liquid applications. Guide
BS 8456:2005 Code of practice for design and installation of directional sounder evacuation systems
BS 8459:2005 Determination of extractable matter in textiles. Method
BS 848-1:1997 Fans for general purposes. Performance testing using standardized airways
BS 848-10:1999 Fans for general purposes. Performance testing of jet fans
BS 848-2.6:2000 Fans for general purposes. Methods of noise testing. Airborne noise emitted by small air-moving devices. Section 6: Airborne noise emitted by small air-moving devices
BS 848-3:2001 Fans for general purposes. Performance testing in situ
BS 848-4:1997 Fans for general purposes. Dimensions
BS 848-5:1999 Fans for general purposes. Special for mechanical safety (guarding)
BS 848-7:2003 Fans for general purposes. Specifications for balancing and vibration
BS 848-8:1999 Fans for general purposes. Vocabulary and definition of categories
BS 8500-1:2002 Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier
BS 8500-2:2002 Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete
BS 8501:2002 Graphical symbols and signs. Public information symbols
BS 8502:2003 Graphical symbols and signs. Creation and design of public information symbols. Requirements
BS 852:1939 Specification for toolmakers' straightedges
BS 853-1:1996 Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply
BS 853-2:1996 Specification for vessels for use in heating systems. Tubular heat exchangers and storage vessels for building and industrial services
BS 855:1990 Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW)
BS 8555:2003 Environmental management systems. Guide to the phased implementation of an environmental management system including the use of environmental performance evaluation
BS 856:1969 Specification for wing nuts
BS 857:1967 Specification for safety glass for land transport
BS 8621:2004 Thief resistant lock assemblies. Keyless egress
BS 864-2:1983 Capillary and compression tube fittings of copper and copper alloy. Specification for capillary and compression fittings for copper tubes
BS 864-3:1975 Capillary and compression tube fittings of copper and copper alloy. Compression fittings for polyethylene pipes
BS 864-5:1990 Capillary and compression tube fittings of copper and copper alloy. Specification for compression fittings for polyethylene pipes with outside diameters to BS 5556
BS 8666:2000 Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 869:1978 Specification for toolmakers' flats and high precision surface plates
BS 870:1950 Specification for external micrometers
BS 8726-1:2002 Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design. Compression springs
BS 8726-2:2002 Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design. Torsion springs
BS 873-1:1983 Road traffic signs and internally illuminated bollards. Methods of test
BS 873-2:1984 Road traffic signs and internally illuminated bollards. Specification for miscellaneous signs
BS 873-3:1980 Road traffic signs and internally illuminated bollards. Specification for internally illuminated bollards
BS 873-4:1987 Road traffic signs and internally illuminated bollards. Specification for road studs
BS 873-7:1984 Road traffic signs and internally illuminated bollards. Specification for posts and fittings
BS 874:1973 Methods for determining thermal insulating properties with definitions of thermal insulating terms
BS 874-1:1986 Methods for determining thermal insulating properties. Introduction, definitions and principles of measurement
BS 874-3.1:1987 Methods for determining thermal insulating properties. Tests for thermal transmittance and conductance. Guarded hot-box method
BS 874-3.2:1990 Methods for determining thermal insulating properties. Tests for thermal transmittance and conductance. Calibrated hot-box method
BS 876:1995 Specification for hand hammers
BS 8766:2004 Names and identifiers of individuals and groups. Data structure for interoperability. Specification
BS 879-1:1985 Water well casing. Specification for steel tubes for casing
BS 879-2:1988 Water well casing. Specification for thermoplastics tubes for casing and slotted casing
BS 8800:2004 Occupational health and safety management systems. Guide
BS 88-2.2:1988 Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (mainly for industrial application).
BS 88-5:1988 Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuse-links for use in a.c. electricity supply networks
BS 8855-2:2000 Soil analysis. Method for determination of coal tar-derived phenolic compounds
BS 88-6:1988 Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c.
BS 887:1982 Specification for precision vernier callipers
BS 8888:2004 Technical product specification (TPS). Specification
BS 89-2:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for ammeters and voltmeters
BS 89-3:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for wattmeters and varmeters
BS 894:1956 Specification for Ubbelohde apparatus for flow and drop points
BS 89-4:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for frequency meters
BS 89-5:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for phase meters, power factor meters and synchroscopes
BS 89-6:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for ohmmeters (impedance meters) and conductance meters
BS 89-7:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for multi-function instruments
BS 89-8:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for accessories
BS 89-9:1990 Direct acting indicating analogue electrical measuring instruments and their accessories. Recommended test methods
BS 8F 35:2002 Braided linen (flax) lacing cord for aerospace purposes
BS 90:1975 Specification for direct-acting electrical recording instruments and their accessories
BS 9000-1:1989 General requirements for a system for electronic components of assessed quality. Specification of general procedures
BS 9000-2:1996 General requirements for a system for electronic components of assessed quality. Specification for the national implementation of the CECC system
BS 9000-3:1996 General requirements for a system for electronic components of assessed quality. Specification for the national implementation of the IECQ system





To receive a quote for any standard, please review our partners on the right


Return To Glossary Index






HOW TO PURCHASE STANDARDS 
To receive a quote for any standard, please review our partners below:

RESOURCES & INNFORMATION





Copyright Standards Direct. All rights reserved.